IRQ problem with pv149 on mdk 10.1

Post here to ask any questions about hardware suitability, configuration in ZoneMinder, or experiences. If you just want to know if something works with ZoneMinder or not, please check the Hardware Compatibility sections in the forum, and the Wiki first. Also search this topic as well.
Post Reply
Dr.Pepper
Posts: 7
Joined: Tue Feb 22, 2005 11:11 pm

IRQ problem with pv149 on mdk 10.1

Post by Dr.Pepper » Tue Apr 12, 2005 10:16 pm

Hello

I bough an pv149 card (4 bt878), it gets detected by bttv as an 98 (pv150). but as it tries to asign an IRQ for each of the bt chips i get the following error

bttv0: can't get IRQ 41
bttv0: can't get IRQ 42
bttv0: can't get IRQ 43
bttv0: can't get IRQ 40


how can i change the IRQ numbers the card is trying to get?

Im using a 2.6 kernell

Thanks for all your help

User avatar
zoneminder
Site Admin
Posts: 5220
Joined: Wed Jul 09, 2003 2:07 pm
Location: Bristol, UK
Contact:

Post by zoneminder » Thu Apr 14, 2005 8:58 am

I think you'd probably get a bit more joy by asking on a bttv/video4linux list or site. Alternatively you might find your bios allows you to control the settings. Even moving to a different PCI slot will often reassign interrupts.

Phil

Dr.Pepper
Posts: 7
Joined: Tue Feb 22, 2005 11:11 pm

Post by Dr.Pepper » Thu Apr 14, 2005 11:53 pm

Thanks for your input. I solved the problem...

Turn on ACPI on the bootloader menu.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests