Amcrest IP5M isn't beeing seen by ZoneMinder
Posted: Sat Nov 21, 2020 8:42 pm
I just installed ZoneMinder and purchased my first IP camera an Amcrest IP5M-T1179EW-28MM, Amazon link is here:
https://www.amazon.com/gp/product/B083G ... UTF8&psc=1
Had no problems connecting it to my network and viewing camera output from my iPhone and my PC. I can also ping the camera from my ZoneMinder Linux console. I also confirmed from Amcrest Survellance Pro on my PC that the RTSP port is 554.
Based upon what I'm seeing at this link:
viewtopic.php?f=10&t=30024&p=117906&hil ... st#p117906
and also this link:
https://wiki.zoneminder.com/Amcrest_QCam
It looks like I should use the following settings when adding the device:
General:
Source Type: Ffmpeg
Function: Mocord
Source
Source Path: rtsp://[username]:[password]@[deviceIP]:554/cam/realmonitor?channel=1&subtype=0
Method: TCP
Target colorspace: 32 bit colour
Capture Resoloution (pixels): 2592, 1944, 2592X1944 5MP
When I click save the device shows in the ZoneMinder console with Mocord / Not Running / 0B/s in the Function column.
Any help would be appreciated!
https://www.amazon.com/gp/product/B083G ... UTF8&psc=1
Had no problems connecting it to my network and viewing camera output from my iPhone and my PC. I can also ping the camera from my ZoneMinder Linux console. I also confirmed from Amcrest Survellance Pro on my PC that the RTSP port is 554.
Based upon what I'm seeing at this link:
viewtopic.php?f=10&t=30024&p=117906&hil ... st#p117906
and also this link:
https://wiki.zoneminder.com/Amcrest_QCam
It looks like I should use the following settings when adding the device:
General:
Source Type: Ffmpeg
Function: Mocord
Source
Source Path: rtsp://[username]:[password]@[deviceIP]:554/cam/realmonitor?channel=1&subtype=0
Method: TCP
Target colorspace: 32 bit colour
Capture Resoloution (pixels): 2592, 1944, 2592X1944 5MP
When I click save the device shows in the ZoneMinder console with Mocord / Not Running / 0B/s in the Function column.
Any help would be appreciated!