Post here to ask any questions about hardware suitability, configuration in ZoneMinder, or experiences. If you just want to know if something works with ZoneMinder or not, please check the Hardware Compatibility sections in the forum, and the Wiki first. Also search this topic as well.
- Posts: 1
- Joined: Sat Nov 18, 2017 5:04 pm
I bought a new IP camera in China recently. It is quite good, as far as it goes, and it works fine - you install an app on your mobile and can connect to it from anywhere. But the documentation is very sparse - in Chinese - but apparently it is called 'AP131' and the company may be called "东莞市波特器，材有限公司" (no idea, but perhaps somebody else knows them?). With nmap, I can see:
Code: Select all
Starting Nmap 6.00 ( http://nmap.org ) at 2017-11-18 17:00 GMT
Nmap scan report for frontdoor (192.168.0.19)
Host is up (0.0013s latency).
Not shown: 996 closed ports
PORT STATE SERVICE
80/tcp open http
554/tcp open rtsp
1935/tcp open rtmp
8080/tcp open http-proxy
MAC Address: 00:FC:B8:5F:7B:BA (Unknown)
Nmap done: 1 IP address (1 host up) scanned in 1.70 seconds
And that is about it - I have tried a number of combinations, but no luck so far. Telnet to port 554 gives me:
Code: Select all
RTSP/1.0 400 Bad Request
Server: Hipcam RealServer/V1.0
I tried to click the ONVIP link on the 'Add Monitor' page, and got Source Type FFMPG and a long source path, but all I see is a blue rectangle. So - where do I go from here?
- Posts: 76
- Joined: Mon May 02, 2016 8:14 am
Try and talk to it with ONVIF Device manager. What does that say?
Who is online
Users browsing this forum: No registered users and 5 guests