PTZ for Digoo M1X

Post here to ask any questions about hardware suitability, configuration in ZoneMinder, or experiences. If you just want to know if something works with ZoneMinder or not, please check the Hardware Compatibility sections in the forum, and the Wiki first. Also search this topic as well.
Post Reply
sebr
Posts: 4
Joined: Sun Oct 29, 2017 7:02 pm

PTZ for Digoo M1X

Post by sebr » Sun Oct 29, 2017 7:12 pm

Hello, I am currently trying to make some Digoo M1X cams work with ZM. The stream works well, but I struggle with the PTZ controls.
In the "control" tab I chose "ONVIF Camera" and in "control address" I set "192.168.0.230:5000". but not works.
With iSpy Software under Windows ONVIF detected as:
http://192.168.0.230:5000/onvif/device_service
and working fine (also camera type "ONVIF" was chosen).
What to enter in the "control device" box to make it work? :?

gulliverrr
Posts: 5
Joined: Fri Oct 27, 2017 1:07 am

Re: PTZ for Digoo M1X

Post by gulliverrr » Sun Nov 05, 2017 12:12 am

Please post screenshots of the camera/monitor settings pages

sebr
Posts: 4
Joined: Sun Oct 29, 2017 7:02 pm

Re: PTZ for Digoo M1X

Post by sebr » Sun Nov 05, 2017 3:01 pm

You mean the control tab?

gulliverrr
Posts: 5
Joined: Fri Oct 27, 2017 1:07 am

Re: PTZ for Digoo M1X

Post by gulliverrr » Sun Nov 05, 2017 10:22 pm

Well all tabs wouldn't hurt :)
I have the Digoo-M1Q and I cannot get it to stream the video right without major glitches.
I'm wishing they will be similar...
Thanks

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests