Sunba 601 PTZ

Post here to ask any questions about hardware suitability, configuration in ZoneMinder, or experiences. If you just want to know if something works with ZoneMinder or not, please check the Hardware Compatibility sections in the forum, and the Wiki first. Also search this topic as well.
Post Reply
Condor
Posts: 1
Joined: Fri Jun 09, 2017 6:00 am

Sunba 601 PTZ

Post by Condor » Fri Jun 09, 2017 6:34 am

Anyone have success with a Sunba 601 PTZ camera? I know the camera is working because I can control it using the web interface. ZoneMinder can talk to the camera but it cannot display the image in real time. Have ZoneMinder configured for RTSP. I can see images it has save to the hard drive, but nothing in the Monitor window.

jerrynavarete
Posts: 12
Joined: Wed Jun 21, 2017 9:55 am
Location: Upper Coomera, Queensland, Australia
Contact:

Re: Sunba 601 PTZ

Post by jerrynavarete » Thu Jun 22, 2017 8:49 am

What kind of configuration did you do?

minviri
Posts: 1
Joined: Sat Jan 13, 2018 3:52 am

Re: Sunba 601 PTZ

Post by minviri » Sat Jan 13, 2018 4:36 am

Don't know if yall still need this info....
I was able to get my sunba 805 working with zoneminder.

Source Type: ffpmpeg
rtsp://admin:@x.x.x.x:554/user=admin_password=tlJwpbo6_channel=1_stream=0.sdp?real_stream
Reso: 1920x1080

PTZ:
Create a new control....
Name: sunba
Type: Ffmpeg
Protocol: Netcat
Set Move, Pan, Tilt, Zoom, Focus, Iris to on

Control Address : x.x.x.x:8899
Auto Stop Timeout: 0.15 ##change this to set how far the pan/tilt moves

mikeng
Posts: 2
Joined: Sun Feb 25, 2018 12:15 am

Re: Sunba 601 PTZ

Post by mikeng » Sun Feb 25, 2018 12:19 am

@minviri I just bought the 405 version and was hoping to get the ptz to work with zoneminder. Can you elaborate on the PTZ part please? I looked under /usr/share/perl5/ZoneMinder/Control to add the perl script control file and the existing file is a lot more involved than what you had specified. Where did you set these and got PTZ to work. Sorry I am a new to this...thanks

mikeng
Posts: 2
Joined: Sun Feb 25, 2018 12:15 am

Re: Sunba 601 PTZ

Post by mikeng » Sun Feb 25, 2018 12:27 am

Ok nevermind, You have to enable OPT_CONTROL is checked in Options->System of ZM first. Then restart zoneminder. Then click on the source monitor before you see the "Control" tab. This is where you make your settings. Thanks

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest