Xiaoyi Yi ANTS

Post here to ask any questions about hardware suitability, configuration in ZoneMinder, or experiences. If you just want to know if something works with ZoneMinder or not, please check the Hardware Compatibility sections in the forum, and the Wiki first. Also search this topic as well.
Post Reply
SeraphicRav
Posts: 1
Joined: Sat Oct 24, 2015 9:26 pm

Xiaoyi Yi ANTS

Post by SeraphicRav »

Hi !

Anyone got Xiaoyi Yi Ants working with Zone Minder ? I have firmware 1.8.5.1F and I can access to the RTSP stream throught rtsp://camera_ip_or_name:554/ch0_0.h264 without password.

I configured the camera as a remote source type with the following parameters :
Remote Protocol : RTSP
Remote Method : RTP/RTSP
Remote Host Name : camera_ip_or_name
Remote Host Port : 554
Remote Host Path : /ch0_0.h264
Target Colorspace : 24 bit colour
Capture Width (pixels) : 1280
Capture Height (pixels) : 720
Preserve Aspect Ratio : Not checked
Orientation : Normal
Deinterlacing : Disabled

When starting zoneminder, I get the following message (I don't really get its meaning) :

Code: Select all

2015-10-24 23:30:26.356321	zmc_m9	25928	FAT	Unable to get RTP Info identifier from response 'RTSP/1.0 200 OK CSeq: 3 Session: 2708C9AF Range: npt=now- '	/home/rav/ZoneMinder-1.28.0/src/zm_rtsp.cpp	549
Does someone have a clue ?

Thanks for your attention !

Best regards,

Me
ngmartinho
Posts: 1
Joined: Fri Jan 29, 2016 5:34 pm

Re: Xiaoyi Yi ANTS

Post by ngmartinho »

Same problem :(
charsi
Posts: 2
Joined: Fri Dec 16, 2016 11:12 am

Re: Xiaoyi Yi ANTS

Post by charsi »

Works fine on ffmpeg mode. Just use the full url.
Post Reply