i have an old Grandtec ip camera (not wireless), which has a shi**y image, but works..
i can see the output at xxx.xxx.xxx.xxx/still.jpg and xxx.xxx.xxx.xxx/video.cgi
so, i decided to add this to zoneminder...
these are my settings:
when i start monitor the camera, log file says:
11/06/2011 17:08:07.399762 zmdc[15447].WAR [Can't find process with command of 'zmc -m 5']
11/06/2011 17:08:07.539649 zmdc[15447].INF ['zmc -m 5' starting at 11/11/06 17:08:07, pid = 15760]
11/06/2011 17:08:07.746370 zmdc[15447].WAR [Can't find process with command of 'zma -m 5']
11/06/2011 17:10:25.923406 zmdc[15447].ERR ['zmc -m 5' exited abnormally, exit status 255]
11/06/2011 17:10:25.923620 zmdc[15447].INF [Starting pending process, zmc -m 5]
11/06/2011 17:10:25.924286 zmdc[15447].INF ['zmc -m 5' starting at 11/11/06 17:10:25, pid = 15797]
11/06/2011 17:10:31.074249 zmdc[15447].ERR ['zmc -m 5' exited abnormally, exit status 255]
11/06/2011 17:10:36.081472 zmdc[15447].INF [Starting pending process, zmc -m 5]
11/06/2011 17:10:36.082243 zmdc[15447].INF ['zmc -m 5' starting at 11/11/06 17:10:36, pid = 15798]
camera is orange, but the monitor page has no image....
any help would be appreciated..
i have ZoneMinder - v1.24.4