Need help on Osprey 210

Post here to ask any questions about hardware suitability, configuration in ZoneMinder, or experiences. If you just want to know if something works with ZoneMinder or not, please check the Hardware Compatibility sections in the forum, and the Wiki first. Also search this topic as well.
Post Reply
kuldeepiitk
Posts: 2
Joined: Wed May 12, 2010 3:28 pm

Need help on Osprey 210

Post by kuldeepiitk » Wed May 12, 2010 3:30 pm

Hi All,

I need help on installing Osprey 210 on Ubuntu 9.10. If anybody has been successful, please help me.

Thanks in advance,
Kuldeep

mrd
Posts: 255
Joined: Wed Apr 26, 2006 12:39 am
Location: Boston USA

Post by mrd » Wed May 12, 2010 7:03 pm

You shouldn't have to do anything at all except install it into a slot on the PC. Ubuntu 9.10 should just see it fine.
MRD

kuldeepiitk
Posts: 2
Joined: Wed May 12, 2010 3:28 pm

Post by kuldeepiitk » Thu May 13, 2010 10:19 am

I am afraid, this isn't the case. I had installed the Osprey card before I installed Ubuntu 9.10 on my machine. Any help would be greatly appreciated. Below is the output of lspci on my machine.

00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 10)
00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)

mrd
Posts: 255
Joined: Wed Apr 26, 2006 12:39 am
Location: Boston USA

Post by mrd » Thu May 13, 2010 2:20 pm

I'll see what mine shows up as later today because the system is turned off right now, but I suggest you try a bootable linux like Knopix and see what it says. If you don't see it on knopix, you probably have a bad card or motherboard slot or it's not really an Osprey 210?
MRD

Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests