kodicom 8800

[arielf]

hola lista,, voy a escribir en espñaol , ya qie mi ingles no es bueno
Tengo una tarjeta kodicom 8800 como la que esta en el link de abajo
http://198579.en.ec21.com/8CH_DVR_Card_ ... 65869.html

ya esta funcionando y detectada como bttv878 , pero tambien la tengo instalada en windows y la calidad de imagen en windows es muy superior a la que me muestra en linux Centos 5.3 + Zm 1.24.1

no se si estara mal configurada , abajo les dejo el detalle de mi modprobe.conf

options bttv gbuffers=16 card=77,77,77,77,77,77,77,77 radio=-1 tuner=4
alias char-major-81 bttv
options i2c-algo-bit bit_test=1


lsmod

lsmod | grep bttv
bttv 164533 3
video_buf 27205 1 bttv
ir_common 31813 1 bttv
compat_ioctl32 5569 1 bttv
i2c_algo_bit 12489 1 bttv
btcx_risc 8777 1 bttv
tveeprom 17873 1 bttv
i2c_core 23745 6 i2c_ec,tuner,bttv,i2c_algo_bit,i2c_i801,tveeprom
videodev 25793 4 bttv
v4l2_common 24385 3 tuner,bttv,videodev

La camaras son marca siera con ccv Philips PALN.


gracias

[arielf]

hello list, I will write in espñaol, qie and my English is not good
I have a 8800 card kodicom like this on the link below
http://198579.en.ec21.com/8CH_DVR_Card_ ... 65869.html

already running and detected as bttv878, but also have it installed on windows and windows in image quality is much higher than shown on my linux Centos 5.3 + zm 1.24.1

not be wrong if configured, leaving them down the details of my modprobe.conf

gbuffers = 16 options bttv card = 77,77,77,77,77,77,77,77 radio tuner =- 1 = 4
alias char-major-81 bttv
options i2c-algo-bit bit_test = 1


lsmod

lsmod | grep bttv
bttv 164533 3
video_buf 27205 1 bttv
ir_common 31813 1 bttv
compat_ioctl32 5569 1 bttv
i2c_algo_bit 12489 1 bttv
btcx_risc 8777 1 bttv
tveeprom 17873 1 bttv
i2c_core 23745 6 i2c_ec, tuner, bttv, i2c_algo_bit, i2c_i801, tveeprom
videodev 25793 4 bttv
v4l2_common 24385 3 tuner, bttv, videodev

The cameras are brand Siera Philips paln with CCV.


thanks

[johnnytolengo]

proba con esta configuracion:

Code: Select all

options bttv gbuffers=2 card=102,102,102,102,102,102,102,102 tuner=4 radio=0 coring=1 full_luma_range=1 chroma_agc=1 combfilter=1 autoload=0 triton1=0 vsfx=0

por ahi te mejora un poco, yo tengo el mismo problema pero la imagen safa bastante.

despues avisa.

chau.

[kylejohnson]

As the previous poster said, try using the 'card=102'.
I have the same card in one of machines and use the following and my images look good:

Code: Select all

options i2c-algo-bit bit_test=1
options bttv card=102,102,102,102,102,102,102,102