Axis Camera Compatibility

florianc · Post by **florianc** » Wed Mar 26, 2008 2:15 pm

Hi,

Could you confirm me please if the ZoneMinder software is compatible with all axis camera?

Thanks in advance,

Axis Communications
Florian Combacau
Tel : 01 49 69 61 93

Post by **cordel** » Wed Mar 26, 2008 6:09 pm

Yes most cams are compatable but not all. See the HCL in the Wiki.http://www.zoneminder.com/wiki/index.ph ... d_hardware

ZM Does not support MPEG streams and the 2100 has issues.
Mjpeg push is obviouly prefered

Regards,
Corey

Post by **zoneminder** » Thu Mar 27, 2008 9:08 am

MPEG/RTSP streams will be supported very soon. Work is underway on that feature.

robi · Post by **robi** » Thu Mar 27, 2008 9:48 am

zoneminder wrote:MPEG/RTSP streams will be supported very soon. Work is underway on that feature.

Wow! Good news! Is it something related to V4L2?

jameswilson · Post by **jameswilson** » Thu Mar 27, 2008 10:48 pm

AFAIK Mpeg support is being funded by donation.... expect about 2010 lol

only kidding

No its not related to V4L2 as that is for capture cards not ip cams. Phil is as always putting the hours in to put this support in

betulichergutmensch · Tue Apr 22, 2008 10:50 pm

Sounds good to me, but there's one question left -

is there any possibility for zoneminder to stream data from axis cams through https/ssl connection instead of http?

The Axis 210A is capable of serving pictures through https and I would need that feature (don't ask why, it's a university with very concerned people), because it won't be in a private subnet.

Thanks in advance for some hints about that...

best regards,
robert