8 port 4 chip bt878

maciekc · Post by **maciekc** » Mon Jun 13, 2005 9:44 am

It has 8 ports and 4 bt878 chips on it.
I don't know model and brand of the card.
When using 2 inputs from chip the fps is about 4-5(PAL)
Card doesn't work with 2 inputs at chip when capturing with resolution bigger than 352x288 - when I tried inputs gone red on zm main page.
driver bttv card=0,0,0,0

@Phil
I made photos of this card, can you put it on your web server?

jameswilson · Post by **jameswilson** » Mon Jun 13, 2005 11:14 am

have you tried changing both input setting to be identical i have found that on multi input cards everything (colour depth resoltion etc ) has to be the same. You could try dropping Normal fps down to 1 then enableing ignore fps limit in options that way you can share fps bandwidth as long as all inputs dont go onto alarm at the same time

James

maciekc · Post by **maciekc** » Mon Jun 13, 2005 4:53 pm

My fault - not working with interlaced images. I had simply to small shmall & shmmax values. Now card working perfectly.