RTSP settings on Axis M5525-e

Post here to indicate any hardware you have used and which is known to work with ZoneMinder. Not for questions.
Post Reply
lallhands
Posts: 4
Joined: Thu Feb 21, 2019 10:35 pm

RTSP settings on Axis M5525-e

Post by lallhands »

We are using ZM Version 1.25 running on CentOS. Trying to add some Axis M5525-e cameras into the mix, but I am having no success. here is my testing setup - anyone have any experience with these?
Capture-Axis.PNG
Capture-Axis.PNG (10.38 KiB) Viewed 6289 times
StenHvidsten
Posts: 1
Joined: Tue Feb 26, 2019 10:02 am

Re: RTSP settings on Axis M5525-e

Post by StenHvidsten »

M5525-e_zoneminder.PNG
M5525-e_zoneminder.PNG (39.83 KiB) Viewed 6246 times


rtsp://root:pass@192.168.223.101/onvif-media/media.amp?profile=profile_1_h264&sessiontimeout=60&streamtype=unicast

BUT you must create ONVIF user on the camera. Log on the to the camera, go to System and create the user under ONVIF.

This is working for me on v 1.32.3
lallhands
Posts: 4
Joined: Thu Feb 21, 2019 10:35 pm

Re: RTSP settings on Axis M5525-e

Post by lallhands »

So I'm having problems with this setup. Logs state that

Unable to open input rtsp://root:12345@10.10.10.243/onvif-media/media.amp?profile=profile_1_h264&sessiontimeout=60&streamtype=unicast due to: Operation now in progress

Any ideas what causes this? What is your general setup like? Using Ffmpg?

Thanks in advance!
lallhands
Posts: 4
Joined: Thu Feb 21, 2019 10:35 pm

Re: RTSP settings on Axis M5525-e

Post by lallhands »

So I figured it out - you need a user and profile on the camera for ONVIF. Now my last issue is controlling PZT with ZM - any advice? I tried Axis v2 driver and it did not seem to work.
Post Reply