Tested on ZM 1.30
Default login : admin
Default password : nothing
WARNING : THE WEBUI OF THE FI9821P NOT WORKING ANYMORE !
- You can just change the main (root) login and password, after a RESET and only via Internet Explorer. Others options and parameter are not accessible ! You can't watch your cam via the WEBUI, you need use ZM, VLC or other external software.
- rtsp://LOGIN:PASSWORD@IP_ADDRESS:554/videoMain (audio available)
rtsp://LOGIN:PASSWORD@IP_ADDRESS:554/videoSub (audio available)
rtsp://LOGIN:PASSWORD@IP_ADDRESS:554/audio (not working)
- remote protocol: RTSP
Remote Method : RTSP/Unicast
Remote Host Name : LOGIN:PASSWORD@Camera_IP (if you can don't use admin user !)
Remote Host Port : camera port (default : 554)
Remote Host Path : /videoMain
Capture Width (pixels) : 1280
Capture Height (pixels) : 720
Add PTZ control on ZoneMinder
- If you can, go to your camera WEBUI and creat a dedied "operator" user (never use an admin user with an uncrypted communication)
- Go to ZoneMinder Webui and connect to admin account.
- Go to Options => System => select OPT_CONTROL and save.
- Restart ZoneMinder
Code: Select all
sudo service zoneminder restart
- Now go to your foscam parameters in Control tabs and configure it :
- Controllable : select this case
Control Type : Foscam FI9821W
Control Device : USER:PASSWORD
Control Address : IP_Address:88
Track Motion : don't select (not working)
Return Location : preset 1
- Controllable : select this case
Pics
Relative Link