Hi,
I have finally accomplished settings these two cameras for zoneminder. It is not on Compatibility list on wiki, so it would be a good idea to add it there.
For milesight ms-c3377 it is necessary to have a firmware at least 30.6.0.43, it was not working with earlier release 30.6.0.36. On settings page of the camera, it was necessary to set image to mjpeg not h264 and framsize 720p. Unfortunately I could not make it working in 1020p.
The ms-c3587 camera was working flawlessly since the beginning.
Those are my working settings for both cameras:
Source Type: Remote
Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: user:pass@IP Address of Camera
Remote Host Port: 80 (Default)
Remote Host Path: /ipcam/mjpeg.cgi
Colors: 24 bit
Capture width: 1280
Capture Height: 720
milesight ms-c3377 and ms-c3587 working
Re: milesight ms-c3377 and ms-c3587 working
Thanks for sharing.
By chance did you test this one or maybe have just an idea if it can work with zoneminder : Milesight MS-C2173-P
By chance did you test this one or maybe have just an idea if it can work with zoneminder : Milesight MS-C2173-P