ZoneMinder Forums

i had it running with a pico2000 board and 4 analog NTSC cams, only for monitoring (not rec or modect) and works perfect.

con gusto, PM con los datos de contacto y listo.

Saludos

el tema de los FPS siempre es relativo. Yo he probado placas con una o dos cámaras y funcionan casi a tiempo real, pero, obviamente, al momento de conectar todas las cámaras, comienzan a perder performance. El barrer un chip no es lo mismo quie barrer 8 (por barrer se entiende a leer los datos de ...

http://www.zoneminder.com/forums/viewtopic.php?t=8594&postdays=0&postorder=asc&start=0 Take a look there. The problem resides in the capture driver. ZM only grabs the frames, in the way the driver pass it. If you post-process the images, (in my opinion) you need: Really powerfull hard, a...

http://www.zoneminder.com/forums/viewto ... =geovision

check it.

working in high resolutions (beyond 352x288 PAL or 320x240 in NTSC) generates this kind of problems. The original windows soft, works in 320x240, if you set it up to work in 640x480 you'll see the same kind of glitchs. Maybe you can try to process the frames with FFMPEG. You gonna loose some capacit...

Se supone que en el caso de 1 chip por canal, esta opción no tiene ningun efecto.

Me pongo a disposición como usuario de habla hispana, yo particularmente armo servidores multitarea, combinando zoneminder con, por ejemplo, asterisk. Lo que necesito es "skinnear" la interfase de vista del zoneminder. Ponerle fondo negro y distribuir las vistas de las cámaras de otra f...

Te conviene V4L2, ya que tiene un rendimiento superior (y mas aún con el multibuffer si lo soportan las placas) y mas opciones de espacios de color y normas.

Try disabling V4L_MULTI_BUFFER in OPTIONS menu - CONFIG tab.

Also you can try to set CAPTURES_PER_FRAME in 2 or more.

I want to report, this card works fine under ubuntu and zoneminder This is a 8 conexant CX23380 chips board. I compile lastest V4L2-DVB drivers, and runs it under Zoneminder 1.24.2 Audio was not tested, but video works great. the following reports are from 1 channel (this case number 6) the driver u...

Neppon, great work! the solution to increase the working resolution is, getting a bigger Sharemem in kernel config edit your /etc/sysctl.conf and add at the botton kernel.shmall = 167772160 kernel.shmmax = 167772160 With this settings a pico2000 board works with 4 channels in 640x480. Try bigger val...

which kind of video capture board and cams are you using?

Maybe is your video settings (in the local pc).

If u use an old video card, the refresh of the video stream (the jpeg secuence if u are using this mode) generates this kind of deffect. Try using lower resolutions or loewr color modes.

i got it running on debian 64 bits and works fine