ZoneMinder Forums

Is your HTTP camera connection port 8080? (no easy to read that on 1st print screen) If yes, you have to specify it, i.e.: http://192.168.1.200:8080/ISAPI/System/deviceInfo Try to avoid safari as the xml output will not be easy to read. Prefer Firefox or Opera like browser. No need to specify user:...

You probably have the "Control Device" wrong. Go to the following url: http://<your camera/ISAPI/System/deviceInfo You might have to enter the username and password. This should give you an XML file. Look for the model tag. Whatever is in there should go in the "Control Device" ...

Hi Paranoid, I have an Hk vision cam working well with PTZ command of IVMS 4200 client. But I'm not able to run PTZ command with your script in zoneminder. Probably i'm not able to configure properly - control type - control device - control address in zoneminder. Could you help me please? If you wa...

it doesn't work. no way. PTZ commands are working with the LEFTEK app, I'm able to catch the FFmpeg stream in Zoneminder, but still not to command it through PTZ commands. Strange since it 's a Pelco-D, an HKVISION, and an ONVIF compatible camera. I saw Knigget and Isaac Connor are partecipating in ...

hi, with the last tempative I did, PTZ commands still don't work but I had a response by Zoneminder. The camera is connected with an ethernet cable, below the settings: in General Tab. Source Type= Ffmpeg in Souce Tab: Souce Path: rtsp://admin:admin@192.168.1.201:554/1/h264minor Rmote method: UDP in...

ok, thank you. i will try and tell you.

Hello everybody, I'm running ZM 1.30.4 with 5 indoor Foscam cameras and I'm able to see the video stream and to control the IPCAMs through PTZ commands. Recently I bought on Amazon 3 outdoor PTZ IP Cameras (2,5 '' MINI Camera Dome 1080P 3X Zoom) by LEFTEK: https://www.amazon.it/gp/product/B076MS5YSS...

thanks.I will try.

Only a question: i understand the rule you are suggesting is for all the web pages managed on my server (on my server I'm managing a website and ZM).

Is it possible to apply a rule only in case the web address is //serverip/zm or //serverip/zm/...?

thanks

if i cancel port 80 in ports.conf, it works. all traffic on port 80 is blocked and so ZM is visible only in https. the issue is that i have on the same server a website that works on 80 port. so I cannot close the port 80 (or apply the port forwarding only for 443)... i need a selective behaviour: f...

Hi, I want to publish the Zoneminder service in HTTPS mode only : https://serverip/zm I was able to do publish in HTTPs through the following statements: make-ssl-cert generate-default-snakeoil --force-overwrite a2enmod ssl a2ensite default-ssl and then: service apache2 restart but, trhough this way...

in General Tab: -Source type: Ffmpeg -Max FP: 20 (optional) in Source Tab: -Source path: rtsp://your_userid:your_pwd@your_ip:your_port/videoSub (*:it works with videoMain too) -Remote method: RTP/Unicast -Target color space: 32 bit -Capture width: 640 (*:it seems working only 640x480, not 720p, not...

found the solution. I will report in my next post.

bbunge wrote:https://wiki.zoneminder.com/Foscam

no instructions for FI9831P, only for FI9831W and not working for FI9831P the Control section (PTZ command).

is it working for you?

I need to configure ZM 1.30 to add a new camera, a Foscam FI9831P.

Please could you help me suggesting the right parameters for General, Source and Control configuration sheets?

thanks