Search found 943 matches
- Tue May 06, 2014 11:34 pm
- Forum: ZoneMinder 1.26.x
- Topic: rtps ok in VLC but not into ZM
- Replies: 2
- Views: 1609
Re: rtps ok in VLC but not into ZM
Set your source to ffmpeg instead of rtsp
- Tue May 06, 2014 11:28 pm
- Forum: ZoneMinder 1.25.x
- Topic: a few weeks zoneminder with black screen
- Replies: 3
- Views: 1984
Re: a few weeks zoneminder with black screen
In your /etc/modprobe.d/bttv.conf check for these lines:
alias char-major-81-0 bttv
options bttv gbuffers=32 card=77 tuner=4 radio=0 coring=1 full_luma_range=1 chroma_agc=1 combfilter=1 autoload=0 triton1=0 vsfx=0
Or have a look at this wiki page: Pico2000#ZoneMinder_configuration_2.0
alias char-major-81-0 bttv
options bttv gbuffers=32 card=77 tuner=4 radio=0 coring=1 full_luma_range=1 chroma_agc=1 combfilter=1 autoload=0 triton1=0 vsfx=0
Or have a look at this wiki page: Pico2000#ZoneMinder_configuration_2.0
- Tue Apr 22, 2014 11:38 pm
- Forum: Hardware Queries
- Topic: USB camera - network video feed
- Replies: 4
- Views: 2543
Re: USB camera - network video feed
Maybe will help: http://www.zoneminder.com/forums/viewto ... vlc#p75962
Notice the fps throttle variable; that'll stop the run away bandwidth usage
Notice the fps throttle variable; that'll stop the run away bandwidth usage
- Sat Apr 19, 2014 1:29 am
- Forum: Hardware Queries
- Topic: USB camera - network video feed
- Replies: 4
- Views: 2543
Re: USB camera - network video feed
I used Vlc to do what you're wanting to do.
- Sun Apr 06, 2014 7:54 pm
- Forum: ZoneMinder 1.25.x
- Topic: how to delete old events automatically?
- Replies: 3
- Views: 6164
Re: how to delete old events automatically?
Set up the "purge when full filter" to do exactly what you want
http://www.zoneminder.com/wiki/index.ph ... my_disk.3F
http://www.zoneminder.com/wiki/index.ph ... my_disk.3F
- Sat Apr 05, 2014 2:07 pm
- Forum: ZoneMinder 1.26.x
- Topic: Multiple Hard Disks
- Replies: 1
- Views: 1406
Re: Multiple Hard Disks
I've used raid, lvm, and reinstallation of OS to do what you're asking. Might help: http://www.zoneminder.com/forums/viewto ... ive#p79248
- Sat Apr 05, 2014 1:55 pm
- Forum: ZoneMinder 1.26.x
- Topic: combining events into one video
- Replies: 2
- Views: 1644
- Sat Apr 05, 2014 1:52 pm
- Forum: ZoneMinder 1.25.x
- Topic: Dealing with dark/light "blinking" during the day
- Replies: 4
- Views: 2376
Re: Dealing with dark/light "blinking" during the day
Have you tried increasing the "Overload Frame Ignore Count" in the zone settings?
- Sat Apr 05, 2014 1:43 pm
- Forum: Hardware Queries
- Topic: Weird horizontal lines with PV-155 card.
- Replies: 4
- Views: 2942
Re: Weird horizontal lines with PV-155 card.
I've seen this issue twice. Once it was a bad power supply for the camera and the second was a bad ballast in a florescent light fixture. Both times cleaning up the power to the cameras was the fix. Just curious: Did you try BGR24 for a capture palette? (Keep in mind that all monitors using a single...
- Sun Mar 16, 2014 4:46 pm
- Forum: ZoneMinder 1.26.x
- Topic: Record triggered by different cam
- Replies: 1
- Views: 1526
Re: Record triggered by different cam
Set up 2 monitors for the camera. One high, one low res.; set high function to monitor, set low to MoDect and then link high to low. You're going to need to play around with this but it is entirely possible.
- Wed Mar 12, 2014 12:04 am
- Forum: ZoneMinder 1.25.x
- Topic: ZM 1.25 on Fedora 20
- Replies: 2
- Views: 1909
Re: ZM 1.25 on Fedora 20
Might help you upgrade to the latest: http://www.zoneminder.com/forums/viewto ... =9&t=21400
RPMs are reported to work with Fedora 20
RPMs are reported to work with Fedora 20
- Wed Mar 12, 2014 12:00 am
- Forum: ZoneMinder 1.25.x
- Topic: Evens are broken up into short segments
- Replies: 3
- Views: 1883
Re: Evens are broken up into short segments
Set the Post Event Image Count to 10 seconds (fps * 10; as in 10 fps times 10 seconds gives a value of 100). This will cure your problem.
- Wed Jan 15, 2014 11:32 pm
- Forum: ZoneMinder 1.26.x
- Topic: 1.25 => 1.26.5: incredible false positives for motion- HELP!
- Replies: 3
- Views: 2071
Re: 1.25 => 1.26.5: incredible false positives for motion- H
Try changing the value for: "monitor::buffer::Alarm Frame Count" to a value of 4. I've never had to go that high (usually 2 or 3 stops this) but your example shows 3 consecutive false alarms.
- Thu Jan 02, 2014 1:21 pm
- Forum: ZoneMinder 1.25.x
- Topic: API to add event
- Replies: 1
- Views: 1309
Re: API to add event
Never tried to use FTP (Apache might need some configuring) but with HTTP use NODECT as your function and configure camera. Here is a link to an Axis camera setup - http://www.zoneminder.com/wiki/index.ph ... nDetection
- Thu Jan 02, 2014 1:05 pm
- Forum: ZoneMinder 1.24.x
- Topic: Continious alarm
- Replies: 2
- Views: 3353
Re: Continious alarm
Try deleting both monitors and repair database (instructions in wikii) then recreate monitors