Search found 129 matches
- Tue Dec 25, 2012 3:37 am
- Forum: ZoneMinder 1.24.x
- Topic: Wavy Image on One Channel
- Replies: 1
- Views: 2795
Re: Wavy Image on One Channel
That is interference. Are you using unshielded cable? Is the cable ran next to cables carrying AC power? I had the same issue but much worse when I was still using analog cameras out in my garage. I have power and unshielded CAT5 lines ran to the garage. Analog signal over CAT5 which is ran next to ...
- Mon Dec 24, 2012 12:19 am
- Forum: ZoneMinder 1.25.x
- Topic: Export video option not shown
- Replies: 2
- Views: 1471
Re: Export video option not shown
In options. Images tab. Make sure "Is the ffmpeg video encoder/decoder installed" is checked. Make sure the ffmpeg path is set and correct. Then you will have the option for video export.
- Sat Dec 22, 2012 1:24 pm
- Forum: ZoneMinder 1.25.x
- Topic: newbie: zm recording contiuously
- Replies: 2
- Views: 1422
Re: newbie: zm recording contiuously
You need to set it to Modect. Mocord records continuous while detecting motion. Modect records only when there is motion.
- Mon Dec 17, 2012 11:24 pm
- Forum: ZoneMinder 1.25.x
- Topic: ZoneMinder::Control module broken on ubuntu 12.04 LTS
- Replies: 1
- Views: 1283
Re: ZoneMinder::Control module broken on ubuntu 12.04 LTS
I'm running ubuntu 12.04 and PTZ support works right out of the box with my Foscam PTZ clone. My experience with getting PTZ support working has all been with getting the names correct and the same. Filename and settings names all must be the same. UPPER CASE, lower case, exactly the same. No spaces...
- Sun Dec 16, 2012 3:19 pm
- Forum: ZoneMinder 1.24.x
- Topic: Foscam FI8910W PT PZ Will Not Work, Incompatible.
- Replies: 12
- Views: 9454
Re: Foscam FI8910W PT PZ Will Not Work, Incompatible.
try not using autostop.
If your clicking on the controls and your still get an error like "Control response was status = undefined" I think you still have something named wrong somewhere. In your control file, your file name, settings in zoneminder for the control file/type.
If your clicking on the controls and your still get an error like "Control response was status = undefined" I think you still have something named wrong somewhere. In your control file, your file name, settings in zoneminder for the control file/type.
- Thu Dec 13, 2012 9:08 pm
- Forum: ZoneMinder 1.25.x
- Topic: No video tab on Events
- Replies: 2
- Views: 1361
Re: No video tab on Events
I had this problem too.
Go to options, images tab.
Make sure the "Is the ffmpeg video encoder/decoder installed" cheked.
Also make sure ffmpeg is installed and the path is correct.
Go to options, images tab.
Make sure the "Is the ffmpeg video encoder/decoder installed" cheked.
Also make sure ffmpeg is installed and the path is correct.
- Wed Dec 12, 2012 10:45 pm
- Forum: ZoneMinder 1.24.x
- Topic: Foscam FI8910W PT PZ Will Not Work, Incompatible.
- Replies: 12
- Views: 9454
Re: Foscam FI8910W PT PZ Will Not Work, Incompatible.
I think I has issues like this when trying to get my PTZ camera to work. I dont remember what the exact issue was but I can tell you a few places to look. Make sure your control script has the correct permissions. For example mine are root:root with -rw-r--r--. Example if you script is named Foscam....
- Wed Dec 12, 2012 10:33 pm
- Forum: ZoneMinder Hints & Tips
- Topic: Help configuring ZM with one CAM and different popositions
- Replies: 4
- Views: 4924
Re: Help configuring ZM with one CAM and different popositio
I'm not to sure what your wanting. Can you provide the code for your script?
Are you saying if motion is detected by camera 1, PTZ camera will move to position 2. If motion is detect by camera 2, move PTZ camera to position 3. Something like that?
Are you saying if motion is detected by camera 1, PTZ camera will move to position 2. If motion is detect by camera 2, move PTZ camera to position 3. Something like that?
- Tue Dec 11, 2012 9:51 pm
- Forum: ZoneMinder 1.25.x
- Topic: Zoneminder stops at 12 monitors.
- Replies: 7
- Views: 3739
Re: Zoneminder stops at 12 monitors.
Are you viewing the monitors in montage mode or individual? If in montage and you are using FireFox you will have to change some settings in FF in order to see all the cameras at once.
- Mon Dec 10, 2012 11:14 pm
- Forum: ZoneMinder 1.25.x
- Topic: Is it possible to timestamp in milliseconds?
- Replies: 2
- Views: 1570
Re: Is it possible to timestamp in milliseconds?
You can add a .%f to the end of the seconds to get XX.xx seconds.
Example
%N - %y/%m/%d %H:%M:%S.%f
Its a StrfTime format if you want to look into other options.
Example
%N - %y/%m/%d %H:%M:%S.%f
Its a StrfTime format if you want to look into other options.
- Mon Dec 10, 2012 11:03 pm
- Forum: ZoneMinder 1.25.x
- Topic: how do I find current run state ?
- Replies: 6
- Views: 3294
Re: how do I find current run state ?
You can chage that but it does not say what state its currently in. At lease for me it only says "stopped" or "running". If I change to state "test" it will only show running at the top of the page. I dont see anything in the database that stores the current run state s...
- Mon Dec 10, 2012 12:51 am
- Forum: ZoneMinder 1.25.x
- Topic: how do I find current run state ?
- Replies: 6
- Views: 3294
Re: how do I find current run state ?
I took a quick look at the run states and I dont see where it loggs what state its currently in. From the way it looks when you create a run state all it does is change the state of the monitors and thats it. Someone else with more knowledge than me can chime in here with a definite answer. If it do...
- Sun Dec 09, 2012 5:12 pm
- Forum: User Contributions
- Topic: Wanscam Foscam clone PTZ control file.
- Replies: 2
- Views: 3492
Re: Wanscam Foscam clone PTZ control file.
I've been playing with the camera some more and got a few more things working. Camera now can move relative and diagonally. I've corrected the movements so they move the right way. I'm unable to get auto stop to work at the moment so you will have to stop manually if doing a continuous pan or tilt. ...
- Sat Dec 08, 2012 12:50 am
- Forum: User Contributions
- Topic: Wanscam Foscam clone PTZ control file.
- Replies: 2
- Views: 3492
Re: Wanscam Foscam clone PTZ control file.
After looking into the commands for this post I have found that this camera accepts degree command instead of the onstep command. Maybe this can be use for motion tracking? I'll look into it but dont expect anything soon. Sample command. To move camera up 50 positions decoder_control.cgi?command=2&a...
- Fri Dec 07, 2012 11:41 pm
- Forum: User Contributions
- Topic: Wanscam Foscam clone PTZ control file.
- Replies: 2
- Views: 3492
Wanscam Foscam clone PTZ control file.
I had to modify the Foscam PTZ control file to make the Wanscam PTZ camera work somewhat correctly. I've also modified it so I can easily command it to go to any position with a simple shell script. I apologize for the sloppy code edits. In time I hope to clean it up and get some other things workin...