Search found 1111 matches

by kingofkya
Fri Feb 10, 2012 2:02 am
Forum: ZoneMinder 1.25.x
Topic: How can I reach Zoneminder from the public Internet
Replies: 3
Views: 1996

Re: How can I reach Zoneminder from the public Internet

Look up "port forwarding + your3gModel" if that is even possible as a lot of 3g modems as of late put you behind a N.A.T
by kingofkya
Fri Feb 10, 2012 2:00 am
Forum: Feature Requests
Topic: GPIO control and triggers
Replies: 4
Views: 4045

Re: GPIO control and triggers

This is kinda why it dosen't exist it would require a kernel driver as well it being very non standard between cards. A better bet would be to use zmtrigger and a serial device.
by kingofkya
Sun Jan 29, 2012 11:24 pm
Forum: Non-ZoneMinder Chat
Topic: poor man's way to safely offsite video footage? (youtube?)
Replies: 2
Views: 2171

Re: poor man's way to safely offsite video footage? (youtube

Waste of time is my thought. :)
Sorry but when you can get a server with a 500gb drive for $60-70 bucks. The free option is just not worth it.

http://www.serverpoint.com/en/dedicated ... vers.phtml
by kingofkya
Wed Jan 04, 2012 4:43 am
Forum: ZoneMinder 1.25.x
Topic: Any chance I can use this Hardware?
Replies: 10
Views: 3268

Re: Any chance I can use this Hardware?

You shoudl be fine if my pentum 3 @ 600mhz can do motion detect on 2 640x480 8fps cctv camers i am sure almost any hardware can do it. Just make sure to set frame skip in the monitor setup page makes motion detect run on every other 5th etc frame rather than every one.
by kingofkya
Tue Jan 03, 2012 3:05 am
Forum: Non-ZoneMinder Chat
Topic: zm -good enough for proffesional use ??
Replies: 6
Views: 3225

Re: zm -good enough for proffesional use ??

Simple reason is most users buy a cheap anolog capture card. Where 1 30fps captre is shared between cams. Ex 2 cameras on a 30fps card gives around 8fps and it drastically goes down from there. I run mine on a slitley better techwell based card at 10fps for one simple reason cost. That and 10fps is ...
by kingofkya
Tue Jan 03, 2012 2:59 am
Forum: Non-ZoneMinder Chat
Topic: how to achieve high quality streaming?
Replies: 1
Views: 1866

Re: how to achieve high quality streaming?

Can it, Yes. Is it efficient well no. Simple enable mpeg streaming and turn up bit rate in High Bandwidth tab. As well has a FPS of 10-25 on the camera itself.
by kingofkya
Wed Sep 14, 2011 2:08 am
Forum: Hardware Queries
Topic: Current recomendations for a PoE IP camera?
Replies: 4
Views: 1892

Re: Current recomendations for a PoE IP camera?

Yeah basically avoid anything with built in ir. Even my ultrateck anolog cameras (auto iris) i got for nothing work better at night than most of thous. Axis 216FD is the one I like as its very versatile. Can go outside as long as its not fully exposed. But in general if you want good and consistent ...
by kingofkya
Sun Sep 11, 2011 9:06 pm
Forum: ZoneMinder Hints & Tips
Topic: Input Wanted: ZoneMinder to drive a Finish Line Camera
Replies: 1
Views: 1530

Re: Input Wanted: ZoneMinder to drive a Finish Line Camera

If the camera is setup and car see the number it should not be a problem. As ZM also records warm up frames aka pre-event. So a delay would not be a real issuse. Also the notes field would be very effective for this as you could put something in there like car 123. Then search DB with filter later f...
by kingofkya
Sun Sep 11, 2011 8:55 pm
Forum: Feature Requests
Topic: Ability to switch between Stills and Stream mode
Replies: 3
Views: 1477

Re: Ability to switch between Stills and Stream mode

Or better yet Jpeg / MJpeg / MPEG
by kingofkya
Sun Sep 11, 2011 8:50 pm
Forum: Feature Requests
Topic: please help!
Replies: 1
Views: 1058

Re: please help!

Please see my signature. If your serious about this send me a request on Elance.
by kingofkya
Sun Sep 11, 2011 8:47 pm
Forum: Feature Requests
Topic: POS Integration
Replies: 3
Views: 1854

Re: POS Integration

Ok here a easy one go to ebay.com search "vga to av" $10 - $20 to convert a vga input into a camera. http://www.ebay.com/itm/PC-Laptop-VGA-TV-RCA-Composite-S-video-Converter-Box-/180681527665?pt=LH_DefaultDomain_0&hash=item2a11755171#ht_2193wt_1274 You also need a capture card if you don't already h...
by kingofkya
Sun Sep 11, 2011 8:23 pm
Forum: ZoneMinder 1.25.x
Topic: Is Zone Minder appropriate for a 30+ camera installation?
Replies: 2
Views: 1524

Re: Is Zone Minder appropriate for a 30+ camera installation

I don't think it would be a problem as long as you keep in reasonable 10fps or less. With minimal or no motion detection. Also if useing motion detect make sure to set the skip_frame parameters in camera setup. EX: skipframe 5 would check for motion twice a second running at 10fps rather than 10 tim...
by kingofkya
Fri Sep 02, 2011 8:24 pm
Forum: ZoneMinder 1.25.x
Topic: MJPEG vs MPEG for low bandwidth and CPU
Replies: 13
Views: 4582

Re: MJPEG vs MPEG for low bandwidth and CPU

Mpeg is a container

h.264 is codec


The codec goes inside the container.
by kingofkya
Wed Aug 31, 2011 10:28 pm
Forum: Feature Requests
Topic: New zone / black Area
Replies: 6
Views: 3527

Re: New zone / black Area

There is always the black tape or paint option :).

You could also see if you can make a patch for zmc. The svn is available.
by kingofkya
Wed Aug 31, 2011 9:08 pm
Forum: ZoneMinder 1.25.x
Topic: Monitoring Cams on Other ZM Machines
Replies: 2
Views: 1396

Re: Monitoring Cams on Other ZM Machines

Code: Select all

http://10.0.0.115/cgi-bin/nph-zms?mode=jpeg&monitor=1&scale=100&maxfps=30&password=admin&username=admin