Thanks for the information. I found the script at :
http://www.zoneminder.com/forums/viewto ... brightness
and will give it a try. Thanks
cheers,[/url]
Search found 35 matches
- Wed Feb 22, 2006 7:15 pm
- Forum: ZoneMinder Previous Versions
- Topic: change in brightness
- Replies: 4
- Views: 6478
- Sat Feb 11, 2006 4:18 pm
- Forum: ZoneMinder Previous Versions
- Topic: change in brightness
- Replies: 4
- Views: 6478
change in brightness
Hi, Two of my four cameras are getting darker and darker during the day and then they get back to normal brightness when it gets dark outsude. Before the update to 1.22 it was only one camera and I thought it was a problem with the camera, but now when I get it on two cameras I wonder. For a sample ...
- Wed May 18, 2005 6:03 am
- Forum: Hardware Queries
- Topic: OV511 chip doesn't work with 2.6.11 :(
- Replies: 4
- Views: 5334
- Tue May 17, 2005 4:40 pm
- Forum: Hardware Queries
- Topic: OV511 chip doesn't work with 2.6.11 :(
- Replies: 4
- Views: 5334
That's good to know, thanks. When I plug my creative webcam III I get the following from dmesg. 3rdparty/ov511/ov511_core.c: USB OV511 video device found 3rdparty/ov511/ov511_core.c: model: Creative Labs WebCam 3 (id=21) 3rdparty/ov511/ov511_core.c: Device at usb-0000:00:10.1-1 registered to minor 0...
- Tue May 17, 2005 6:08 am
- Forum: Hardware Queries
- Topic: OV511 chip doesn't work with 2.6.11 :(
- Replies: 4
- Views: 5334
OV511 chip doesn't work with 2.6.11 :(
I just upgraded to Mandriva 2005 which comes with kernel 2.6.11 and my USB cameras doesn't work any more :( I found this : "ov511-2.28 driver does not work under linux 2.6.11 for three reasons: 1. remap_page_range does not exist (The log message is \"ov511: Unknown symbol remap_page_range\...
- Tue Mar 15, 2005 7:05 am
- Forum: Hardware Queries
- Topic: frame rate with 4xinput on one BT878
- Replies: 6
- Views: 5411
Victor, can you please tell me what you have? On my board it's almost just bt878, all inputs goes AC-coupled direct to bt878. I send a link to a picture of my card. http://www.tabykyrkby.net/images/bt878.jpg
It just cann't be true
cheers, tord
It just cann't be true
cheers, tord
- Mon Mar 14, 2005 4:41 pm
- Forum: Hardware Queries
- Topic: frame rate with 4xinput on one BT878
- Replies: 6
- Views: 5411
that sounds terrable! A card with 4 inputs can only manage 2 frames a second when all cameras are connected? Who wants a card like that? I thought the drawback was just that all settings had to be the same for the cameras, not to end up with 2 f/s. Well one learn all the time. I just tested with red...
- Sun Mar 13, 2005 3:33 pm
- Forum: Hardware Queries
- Topic: frame rate with 4xinput on one BT878
- Replies: 6
- Views: 5411
frame rate with 4xinput on one BT878
HI, I can't just get it, if I use one input I can change frame rate, if I use two it seams that it always divide 8 with the amount of active inputs? If I understand this right, the BT878 can handle 25 frames/sec and it gets divided between all inputs. That is, should it not be about 6 and not 2 as I...
- Thu Mar 10, 2005 7:36 am
- Forum: ZoneMinder Previous Versions
- Topic: configure problem on Mandrake 10.1, zm 1.20
- Replies: 18
- Views: 12658
- Wed Mar 09, 2005 7:42 am
- Forum: ZoneMinder Previous Versions
- Topic: Cambozola .65 vs. .50
- Replies: 4
- Views: 2990
I don't know what I've done, but Cambozola 0.65 do work with more than 2 cameras in the montage view. Normaly I use Firefox which don't need cambozola, but when I try IE is starts the applet without problems (only tried with four cameras so far). I use MDK 10.1 OE and I've ZM_CAN_STREAM to AUTO chee...
- Tue Mar 08, 2005 10:48 am
- Forum: ZoneMinder Previous Versions
- Topic: configure problem on Mandrake 10.1, zm 1.20
- Replies: 18
- Views: 12658
the only thing I want to add is my setup on MDK 10.1OE For whatever reasons I have to use a tick in the box for ZM_OPT_USE_AUTH and also ZM_AUTH_METHOD 'hashed' and a included secret in ZM_AUTH_SECRET. The last tick was for ZM_RAND_STREAM, I did have problems without this tick. Since I'm using firef...
- Mon Mar 07, 2005 6:52 am
- Forum: ZoneMinder Previous Versions
- Topic: Colour not working
- Replies: 20
- Views: 11214
- Sun Mar 06, 2005 12:58 pm
- Forum: ZoneMinder Previous Versions
- Topic: Colour not working
- Replies: 20
- Views: 11214
- Sat Mar 05, 2005 2:01 pm
- Forum: ZoneMinder Previous Versions
- Topic: Colour not working
- Replies: 20
- Views: 11214
- Sat Mar 05, 2005 8:36 am
- Forum: ZoneMinder Previous Versions
- Topic: Colour not working
- Replies: 20
- Views: 11214