ZoneMinder Forums

Hi Flash Thanks for your reply, did read the memory FAQ but found it way out of my league to be tinkering with that, although I really think my problem is somewhat other you see, I used source as File, uploaded the jpg image into a directory inside ZM and it read it without any trouble or errors, so...

Hi This is what I get when I try to see a capture image by clicking on monitor: INF [Authenticated user 'root'] WAR [Shared data not initialised by capture daemon, some query functions may not be available or produce invalid results] WAR [Unable to store frame as shared memory invalid] Using Source:...

Hi The "choke" thing you are talking about perhaps has to do more with ZM than the connection. I believe this is more of a documented yet not cleared problem with 1.24.x and ajax. Some time ago I found that tinkering with: Options - (High B/W or Medium B/W or Low B/W) - WEB_H_AJAX_TIMEOUT ...

Hi Flash and Petey: Flash Have done under source instructions using HTTP protocol and both Simple and Regexp full hotname wwwdotetcdotcom and correct path with 24bitcolor and 640x480 image but no go. Petey Did the HTTP protocol change, restarted ZM but still a black screen :-S I know this should wor...

Hi Clipo Thanks for your help. I have a 3G camera working via cellular line but IP is masked (no route back to camera) so camera uploads FTP image to a server and from there is where I am trying to pull this jpg. I am not linux saavy, do know I could setup FTP server on this box, used ZMLarch Live c...

Hi Community: I am trying to configure ZM 1.24.2 installed through ZMLarch live cd to extract a jpg some camera is uploading via FTP to a website. If I use: http://www. any website.com/mobilecam/video.jpg I CAN see an image on any browser. This is what I have tried: Source Type: Remote Source Tab: R...

kingofkya

Sorry, did not understand your fix, how can I check to see what you are saying?

Thanks

Hi I am running a single IDE drive, these are the results: With ZM running, 3 tests: # hdparm -tT /dev/hda /dev/hda: Timing cached reads: 2344 MB in 2.00 seconds = 1172.35 MB/sec Timing buffered disk reads: 72 MB in 3.20 seconds = 22.52 MB/sec [root@sanl1v16 /]# hdparm -tT /dev/hda /dev/hda: Timing ...

Hi Community! I am not a linux expert so will try to explain the best I can: I have a 1.23 setup with 16CH capture card. Setup was running with no problems until (I guess) HD filled up to 90% which is where it is at running Purgewhenfull, I mention this but, dunno if this could have something to do ...

Hi Well, yes I am aware of WATCH_CHECK_INTERVAL, but too, have gone into the console many times to find that a simple restart in the Source hence zm capture restart gets things going. I have yet o find what is the trouble first, a loss of signal that freezes capture or if its the capture itself whic...

Hi Neppon! Thanks for your tips I am actually trying to make some kind of blue screen, black screen, image freeze detection that when true sends a restart on the capture daemon. One other question, does: #/usr/bin/perl -wT /usr/lib/zm/bin/zmdc.pl restart zmc -m X Work for both 1.23 and 1.24.2 versio...

Hi Well it is a waste of hardware from the moment u dont capture at full res and not using its built in features. I do capture at 640x480 at 4 fps. A couple of cams at this rate and size fills up on modect a 500GB drive with about a month and a half of events, so this is about just the way I like it...

Hi! It does work under 1.24.2 I use the following under Source: Remote Protocol: RTSP Remote Method: RTP/RTSP Remote Host Name: xxx.xxx.xxx.xxx (Camera IP Adress) Remote Host Port: 554 Remote Host Path: /live2.sdp (u can get from any of the 4 streams, check cam settings for others) Remote Image Colo...

Hi Community! Once logged in as root in command prompt, is there a way to restart a specific monitor´s capture daemon from prompt? What command would that be? Sometimes I have black screens on IP cameras and although there is some kind of check built into ZM nevertheless, sometimes I have to go int...

Thnx Curtis!

On the other hand, I believe ZM captures the image and analizes it or does some magic with it before time stamping, could there be a window here to get it "raw" before timestamp, or is this done in a manner that does not permit extraction?

Regards!