ZoneMinder Forums

If I could make a suggestion, I did a lot of research on delivering JPG/MJPG streams and found that in many cases delivering JPGS with keep-alive is much better than trying to deliver Multipart JPGS, this is very relevant in mobile and situations where the consumer is lower bandwidth than the produc...

Yup I'm now getting this too, ever since I upgraded to firefox 3.6.3 I cannot view live streams or playback events, I just get a broken image. This is on a v1.24.2 version zonemaster But if I right click that broken image and say "view image" it works. Now on my local zoneminder box which ...

Should be

INSTALL x264
...
cd x264
./configure --enable-pic --enable-shared


to get ffmpg to compile

Must be different than the Lorex LNE3003 then.

-M

Yoics works very well with zoneminder and it is very secure.

See http://support.yoics.com/viewtopic.php?t=266

-M

I wanted to display one of my monitors on my public website hosted at godaddy, nothing real time, just updated ever min or so. Here is my super simple and dirty hack: Create a shell script "putpic" on the zoneminder box with the following (change monitor-X to the monitor you wish to upload...

I've seen this before major reasons are:

1) mixing PAL and NTSC cameras.
2) improper resolution set on 9100 (IE pal set to 320x240 or 640x480)
3) bad ground
4) bad power supply or camera
5) unhooked ports that are not turned off

The little silver ring on the lens moves, it is not obvious but you can focus the camera with that. This camera is similar to the Lorex LNE3003, which I worked on with the guys at Lorex to make the UI much better (cross browser compatible). It also has Yoics built in so you can access it from anywhe...

Your right it's not finding it. For some reason that paths are screwed up. I'm getting -I/usr/loca/bin ... dropping the l in local. Trying to find out why now. darn, now that I edited the file I cannot reproduce, everything working. I'll try unpacking the file again and see if it comes back and let ...

I'm getting the following scope error zm_ffmpeg_camera.cpp: In member function ‘virtual int FfmpegCamera::PrimeCapture()’: zm_ffmpeg_camera.cpp:125: error: ‘SWS_BICUBIC’ was not declared in this scope zm_ffmpeg_camera.cpp:125: error: ‘sws_getCachedContext’ was ...

With out of the box support for Zoneminder. I know many of you are using Yoics with Zoneminder, so here is our latest release with throughput improvements and better control over configurations. View and control your Zoneminder box securly from anywhere. With Yoics you can build Zoneminder boxes tha...

sorry this is just a proof of concept, there still needs to be some integration work.

Haven't had the time yet.

-M

Yea if you can physically install the box and have access to the router DynDns and IP forwarding can work well. But if you need to ship a box and want it to work right out of the box Yoics is very helpful as you can use DHCP on the zoneminder box and you don't have to port forward for remote access ...

For the Zavio camera and zoneminder I think you just want to use jpg grabs on port 80: http://myserver/jpg/image.jpg -also this might work- http://myserver/cgi-bin/jpg/image.cgi For mjpeg you must have the correct port, which there are many, see the config. http://<servername>:<videoport>/video.mjpg...

Sorry been real busy

Here is a tgz of the viewer.

http://www.mycal.net/ys/iPhone.tgz

Read the README file.

There needs to be an integration effort, as this is only a
proof of concept.

-M