ZoneMinder Forums

I recently bought two Inesun POE PTZ cameras for CDN$135 and successfully added them to my Zoneminder system, complete with PTZ control. Inesun Dome Camera on Amazon.ca Image is good quality 1080p and sets up nicely as a Netcap Onvif. Parameters are as follows: General tab: Source Type: Ffmpeg Sourc...

Thank you gbkersey!

Worked perfectly, although I thought I had already done that.

Jack

Hi all, I have an installation of ZM running on an Ubuntu 18.04 VM. When I did the initial setup, I allocated 100GB of a ~225GB SSD to the VM. I have been adding cameras and learning about ZM ever since. (and enjoying it immensely) I seen to have hit a little bump. I am running 4 cameras, and have s...

Once the camera is set up and available on the network, I entered the zoneminder source options as follows:

general settings: Source settings:
Note that these settings are for a Genbolt model GB 600H

Hope this helps.

Jack

Hi FreeSoftwareServers, Sorry for the delay in getting back to you. First step is to go into the camera interface and set up the network and user name. In my case I chose the fixed ip address of 10.0.1.181, and, for purposes of this post set up a user with name "username" and "passwor...

Thanks for the reply Snake, it was very helpful. I wasn't aware of the iSpy resource, and it had the exact connect string that was required, in this case rtsp://<user>:<password>@<ipaddress>/11. As for the setup, I am running v1.32.3. It took me several days of experimentation, but finally got a suc...

Hello all, I am new to Zoneminder, and planning to set up a system of 4-5 cameras, mostly for security around my home, but also as a hobby project. To that end, I have successfully created a Zoneminder server on a Ubuntu 18.04 server VM running on ESXi. Received my first camera today, a GENBOLT 1080...