Search found 16 matches

by sagil
Tue Jan 30, 2018 9:00 am
Forum: ZoneMinder 1.31.x
Topic: ZM crash every 10 seconds
Replies: 15
Views: 30717

Re: ZM crash every 10 seconds

Hi sagil! For a video surveillance it is enough to have < 10 FPS. As you can see from ffplay log, Rockedge was right. Bad RTP stream, a lot of missed packets, quite a bit of >10 missed packets in sequence. Try with lower FPS, except you have fast moving targets (car plates recognition). When errors...
by sagil
Tue Jan 30, 2018 7:58 am
Forum: ZoneMinder 1.31.x
Topic: ZM crash every 10 seconds
Replies: 15
Views: 30717

Re: ZM crash every 10 seconds

1st update. I've changed ZM mode to 'monitor' instead of 'modect'. In addition, I've lowered the 'Maximum FPS' to 25 (from 35) On buffers tab I've lowered 'Image Buffer Size' to 100 Warmup Frames to 25 Pre Event Image Count to 50 Post Event Image Count to 250 Stream Replay Image Buffer to 250 Here i...
by sagil
Mon Jan 29, 2018 12:32 pm
Forum: ZoneMinder 1.31.x
Topic: ZM crash every 10 seconds
Replies: 15
Views: 30717

Re: ZM crash every 10 seconds

I have ZM-1.30.0 on Debian and today: uptime = 13:16:37 up 330 days, 18:05 Since I solved cameras issues this is "set and forget" system, rock solid. I only watch some recorded events occasionally. The most "work" regardless the whole system is cleaning camera lenses off spider'...
by sagil
Mon Jan 29, 2018 12:12 pm
Forum: ZoneMinder 1.31.x
Topic: ZM crash every 10 seconds
Replies: 15
Views: 30717

Re: ZM crash every 10 seconds

Sorry for an unclear advice regarding VLC. With the settings you used in ZM try to watch video with VLC or ffplay: For instance: ffplay.exe rtsp://admin:PASSWORD@Camera1_IP/0 -rtsp_transport tcp and the other camera: ffplay.exe "rtsp://admin:PASSWORD@Camera2_IP/cam/realmonitor?channel=1&su...
by sagil
Mon Jan 29, 2018 11:12 am
Forum: ZoneMinder 1.31.x
Topic: ZM crash every 10 seconds
Replies: 15
Views: 30717

Re: ZM crash every 10 seconds

"time since last capture 13 seconds" - it's obvious, that camera failed, not ZM. I had similar problems with my camera. Cameras are very sensible on stream capture settings. I own two cameras and works perfectly with "source type = ffmpeg" the other one worked a few hours, then ...
by sagil
Mon Jan 29, 2018 8:15 am
Forum: ZoneMinder 1.31.x
Topic: ZM crash every 10 seconds
Replies: 15
Views: 30717

Re: ZM crash every 10 seconds

Jan 28 14:43:02 media-pc zmwatch[31487]: INF [Restarting capture daemon for Monitor-1, time since last capture 13 seconds (1517143382-1517143369)] I believe that this means Zoneminder lost the rtsp stream 13 seconds ago . . . and then it starts trying to reconnect to the stream and it fails. Try co...
by sagil
Sun Jan 28, 2018 7:15 pm
Forum: ZoneMinder 1.31.x
Topic: ZM crash every 10 seconds
Replies: 15
Views: 30717

Re: ZM crash every 10 seconds

is the camera causing this error? I had some cheap HOOTOO IP cams, a Chinese knock off of a FOSCAM, that would run after powering them up and ZM would stream them nicely. Then began the same type of zmc crashing and restarting...... I had to restart or re-save the cameras or power off and on the ca...
by sagil
Sun Jan 28, 2018 1:34 pm
Forum: ZoneMinder 1.31.x
Topic: ZM crash every 10 seconds
Replies: 15
Views: 30717

ZM crash every 10 seconds

I have 1 monitor defined After running for several hours, ZM just crash and keeps crashing every 10 seconds I'm running on Ubuntu 16 Output on 'good flow' : Jan 28 10:58:23 media-pc zmc_m1[19700]: INF [Monitor-1: 2662000 - Capturing at 20.00 fps] Jan 28 10:59:04 media-pc zma_m1[17679]: INF [Monitor-...
by sagil
Sat Jun 17, 2017 4:02 pm
Forum: ZoneMinder 1.30.x
Topic: Hacked Yi Home Camera Support
Replies: 15
Views: 29564

Re: Hacked Yi Home Camera Support

@sagil I recently updated to 1.30.4 and now realize what you mentioned about the different settings screen. How has your experience been with 1.30 and could you share your configuration, including the PATH_ZMS? Hi ! I used 'Ffmpeg', remote method is 'TCP' and used the full URL : rtsp://192.168.0.15...
by sagil
Thu Apr 20, 2017 1:25 pm
Forum: ZoneMinder 1.30.x
Topic: Running script as part of filter condition ?
Replies: 6
Views: 2337

Re: Running script as part of filter condition ?

Actually this part is already done, I'm using Tasker to arm/disarm the monitor using its API and it works great.
The problem is when I leave the house but it's not yet empty,
by sagil
Thu Apr 20, 2017 1:13 pm
Forum: ZoneMinder 1.30.x
Topic: Running script as part of filter condition ?
Replies: 6
Views: 2337

Re: Running script as part of filter condition ?

That's my goal.
i.e. script that checks if someone at home (by ping to its mobile device or any other way) before sending movement email
by sagil
Thu Apr 20, 2017 1:02 pm
Forum: ZoneMinder 1.30.x
Topic: Running script as part of filter condition ?
Replies: 6
Views: 2337

Re: Running script as part of filter condition ?

But this won't be a consition for the filter actions, they will be done anyway+ script, I need the script to be a consition for the filter actions
by sagil
Tue Apr 18, 2017 3:40 pm
Forum: ZoneMinder 1.30.x
Topic: Running script as part of filter condition ?
Replies: 6
Views: 2337

Running script as part of filter condition ?

I want to add a 'custom condition' to a filter (running a script/app and check its exit code)
Is it possible ?

Thanks
by sagil
Sat Apr 15, 2017 5:51 pm
Forum: ZoneMinder 1.30.x
Topic: Hacked Yi Home Camera Support
Replies: 15
Views: 29564

Re: Hacked Yi Home Camera Support

OK I got the issue,
I followed the installation instructions for version 1.29 and not 1.30 so I didn't do the PATH_ZMS part.
As I did this the CGI path was corrected and everything is working !
Thank you for your assistance !
by sagil
Sat Apr 15, 2017 4:23 pm
Forum: ZoneMinder 1.30.x
Topic: Hacked Yi Home Camera Support
Replies: 15
Views: 29564

Re: Hacked Yi Home Camera Support

I have tried configuring the same camera, but it looks a bit different (the "Remote Method" has different options) It looks like the motion events are detected and the camera is successfully connected, but I cant see any image. On VLC everything works great. I have attached my configurati...