ZoneMinder Forums

bbunge wrote:Well, you will need to enable authentication from the options menu once ZM is up and running. That is not part of installation but configuration. See the users guide

http://zoneminder.readthedocs.org/en/latest/

Yea so I feel slightly retarded... I guess I just forgot that I clicked that before.

Just followed the instructions because I wanted to move to 16.04 from 14.04 and I noticed that ZM isn't requiring me to log in or authenticate to itself? If you used the upgrade instructions in the WIKI, they have not been tested with the final release of 16.04. I did a quick review and found a cou...

Just followed the instructions because I wanted to move to 16.04 from 14.04 and I noticed that ZM isn't requiring me to log in or authenticate to itself?

I'd be thinking dual quad core xeons and I'm not sure your hdd throughput will be enough.

I was using RTP/Unicast but was getting dropped frames on my wifi cameras so I switched to RTP/RTSP and now the video is perfect but my zones don't detect motion & record. I'm hoping someone can help shed some light. Source Type: Ffmpeg Function: Modect Enabled: Check Max FPS: 20 Source Path: rt...

It all depends on your raid 6 setup - are you running a physical controller, how much cache on the controller, how many hard drives, what speed etc etc.. ? Have you tried to run any IOP benchmarks across your array? I'm up to 12 HD cameras without issue on my server but it's pretty beefy, and runs o...

super old bump but I have mine working as follows

rtsp://admin:123456@192.168.1.29/11

Have you tried it like a 942L ?

Source Type: remote
Protocol:HTTP
Remote Host Name: <username>:<password>@<camera ip>
Remote Host Path: /video/mjpg.cgi?profileid=1

I'm running 7 720P cameras and 1 1080p cameras and plan to add another 8 on the attached VM config - plenty of room to grow won't even be slightly worried about compute resources. It's at 10% CPU utilization The host is a Cisco UCS C220 M3 with 2x 4 fore Xeon E5-2609 @ 2.4 GHz with 64GB ram and 2.72...