Search found 2930 matches

by bbunge
Sat Mar 23, 2024 6:09 pm
Forum: ZoneMinder 1.36.x
Topic: Zoneminder installation/start error
Replies: 9
Views: 223

Re: Zoneminder installation/start error

Instructions that work :https://wiki.zoneminder.com/Ubuntu_Serv ... der_1.36.x

Note: it may be best to wipe Ubuntu and start over. Recommend use Mariadb instead of MySQL
by bbunge
Thu Mar 21, 2024 12:45 pm
Forum: ZoneMinder 1.36.x
Topic: downgrade 1.36 to 1.34
Replies: 7
Views: 233

Re: downgrade 1.36 to 1.34

thanks i downgraded it sorta worked so wiped the system and did a fresh install with debian bullseye and zoneminder 1.34 i do have an analog capture card and transposing 9 cameras to mp4 is too much load it looks like zoneminder has gone all wifi devices and pretty much abandoned the old analog stu...
by bbunge
Thu Mar 21, 2024 12:43 pm
Forum: ZoneMinder 1.36.x
Topic: CONSIDER IT SOLVED: Unable to connect to Reolink D820A cameras
Replies: 17
Views: 437

Re: Best way to set up server for Zoneminder??

The easiest is to use a single LAN port and let your DHCP server assign IP addresses to the cameras and server. A static Ip address is a good idea for the server, however. As you have a second LAN port, you can set up a separate LAN for the cameras which will be isolated from your main LAN. I would ...
by bbunge
Wed Mar 20, 2024 11:14 pm
Forum: ZoneMinder 1.36.x
Topic: downgrade 1.36 to 1.34
Replies: 7
Views: 233

Re: downgrade 1.36 to 1.34

I've looked at you other posts. If you are running an old analog capture card the problem may be with the capture card and not Zoneminder. I seem to recall issues with old analog hardware on more recent Linux distros. I can't point to a source, however. Debian 11 may detect the card but not give ful...
by bbunge
Wed Mar 20, 2024 8:16 pm
Forum: ZoneMinder 1.36.x
Topic: downgrade 1.36 to 1.34
Replies: 7
Views: 233

Re: downgrade 1.36 to 1.34

i've not been able to view events when saved as individual jpeg files viewing individual files worked in previous releases i've asked here and got no response if there is any work on this no one is talking the usual response is to side step the issue with don't do that or why do you do that Sorry y...
by bbunge
Wed Mar 20, 2024 12:49 am
Forum: ZoneMinder 1.36.x
Topic: purgewhenfull does not list matches but works in the background
Replies: 8
Views: 248

Re: purgewhenfull does not list matches but works in the background

Well, when the filter runs in the background it deletes the first 100 matches. The question is how far below 20% does this take your storage? If you run the filter manually and the disk is not over 20% you will get no matches. I find purge when full to not be a good way to manage storage. It is bett...
by bbunge
Wed Mar 20, 2024 12:38 am
Forum: ZoneMinder 1.36.x
Topic: downgrade 1.36 to 1.34
Replies: 7
Views: 233

Re: downgrade 1.36 to 1.34

No. Not unless you saved a backup of the zm database before you upgraded.

But, I need to ask why you want to downgrade?
by bbunge
Sat Mar 09, 2024 8:12 pm
Forum: ZoneMinder 1.36.x
Topic: Restricted cameras
Replies: 1
Views: 103

Re: Restricted cameras

Delete the user, save, then add it back
by bbunge
Sat Mar 02, 2024 1:46 pm
Forum: ZoneMinder 1.36.x
Topic: Firefox does not show events
Replies: 10
Views: 1875

Re: Firefox does not show events

There is an old Firefox "fix" in my file archives. May help: Enter about:config in the address bar scroll down to browser.cache.check_doc_frequency 3 change the 3 to a 1 browser.cache.disk.enable True -> False network.http.max-connections-per-server -> put a value of 100 network.http.max-p...
by bbunge
Mon Feb 26, 2024 2:30 pm
Forum: ZoneMinder 1.36.x
Topic: Video stopping recording in the middle of the Alarm
Replies: 8
Views: 2576

Re: Video stopping recording in the middle of the Alarm

Remove the 3.00 from Analysis FPS. Leave setting blank Disable Save JPEGs. Video Writer use Camera Passthrough if you can. If you need to use Encode leave the next two to Auto. Lower the Pre and Post event image count. 20 should work for both Under MISC/Section Length the default is 600 seconds for ...
by bbunge
Sat Feb 24, 2024 8:45 pm
Forum: ZoneMinder 1.36.x
Topic: Two cameras go green every night
Replies: 5
Views: 2488

Re: Two cameras go green every night

Is GMT your local time? If not do the cams go green switching from day to night?
by bbunge
Sat Feb 24, 2024 8:41 pm
Forum: ZoneMinder 1.36.x
Topic: Zoneminder keeps using all memory, physical and swap
Replies: 2
Views: 2231

Re: Zoneminder keeps using all memory, physical and swap

Check the database server to see what it is using for resources. Are you using Mariadb? What cam resolution are you using? If 720P or 1040P you may want to drop down a bit. Capturing jffs or video? If both, turn jffs off. If jffs use video. I feel using video uses fewer database resources as there a...
by bbunge
Fri Feb 09, 2024 11:58 am
Forum: ZoneMinder 1.36.x
Topic: Unable to access console - Fresh Installation
Replies: 3
Views: 469

Re: Unable to access console - Fresh Installation

Here are instructions that work for Debian 11 on PC or RPI. https://wiki.zoneminder.com/Debian_11_Bullseye_with_Zoneminder_1.36.x For your RPI I would recommend the 64 bit OS. Use Mariadb instead of MySQL. These entries for the database server are not really necessary but I put them in as the worked...
by bbunge
Fri Jan 19, 2024 5:56 pm
Forum: ZoneMinder 1.37.x Development Branch
Topic: Alarm status is not ended with Norecord
Replies: 22
Views: 115101

Re: Alarm status is not ended with Norecord

I too was noticing the event cut off early. But, it was still working!

Ah, update is showing. Will report back later.