Search found 10 matches

by Rainer
Tue Feb 23, 2010 3:36 pm
Forum: ZoneMinder 1.24.x
Topic: ZM 1.242 on SuSe 11.1 doesn't start
Replies: 9
Views: 4077

I have not assigned any IRQ they had been setup automatically. Where to check and change? It looks to me it is more an issue on the card setup in /etc/modpobe.conf. When I play around with the card numbers the result is always different. Best result I get with card=94 + 97 but only for camera 0. I h...
by Rainer
Tue Feb 23, 2010 2:25 pm
Forum: ZoneMinder 1.24.x
Topic: ZM 1.242 on SuSe 11.1 doesn't start
Replies: 9
Views: 4077

When ZM is started I get this message for all cameras except camera 0: Feb 23 21:49:10 CSS-240 zmc_dvideo4[5290]: ERR [Backtrace: /usr/local/bin/zmc [0x41e642]] Feb 23 21:49:10 CSS-240 zmdc[4824]: ERR ['zmc -d /dev/video7' exited abnormally, exit status 6] Feb 23 21:49:10 CSS-240 zmc_dvideo4[5290]: ...
by Rainer
Sun Feb 21, 2010 3:32 am
Forum: Hardware Queries
Topic: HW-LX808E 8 channel saa7130
Replies: 12
Views: 12078

HW-LX808E

I'm running SuSe11.1 64-Bit, zm 1.2.4.2 with ffmpeg Only to get ZM MP installed was already a challenge. A lot of manual corrections here and there and adding all kind of lib files. After many hours of try&error I have on dev/video0 a perfect picture. The cameras /dev/video1 has a flickering picture...
by Rainer
Sat Feb 20, 2010 6:03 pm
Forum: ZoneMinder 1.24.x
Topic: ZM 1.242 on SuSe 11.1 doesn't start
Replies: 9
Views: 4077

ZM starts now

after adjusting the shared memory in /etc/sysctl to kernel.shmall = 268435456 kernel.shmmax = 268435456 and modifying the /etc/modprobe.conf by adding options saa7134 card=33,33,33,33,33,33,33,33 zm starts without error and I get a streaming video on the 1st camera. The other 7 cameras are either on...
by Rainer
Sat Feb 20, 2010 3:33 pm
Forum: User Contributions
Topic: Sony SNC-RZ50 working control script
Replies: 7
Views: 14365

and where can the camera paramters found now? I try to setup ZM as well but have only flickering picture, black screen or no picture. log files don't show any error. I tried all parameters I can choose in ZM to setup the monitor but no change. I use analog cameras with SONY CCD 420 lines, PAL or NTS...
by Rainer
Fri Feb 19, 2010 9:11 pm
Forum: ZoneMinder 1.24.x
Topic: ZMC Stopping with exit status 255
Replies: 1
Views: 1901

same problem

Hi,

I'm wondering if you ever could solve the problem.
If so ti would be nice to share with me how you did it.

Tanks a lot
by Rainer
Fri Feb 19, 2010 9:06 pm
Forum: ZoneMinder Previous Versions
Topic: Shared memory
Replies: 5
Views: 7961

Shared memory

I have the same problem with SuSe 11.1 64-Bit and ZM 1.2.4.2 with ffmpeg I have a Philipps saa7134 with 8 cameras. out of 8 cameras 2 have a flickering pciture, 2 are black and 4 no reaction at all. I can't find really an error message but when I change the configuration of a monitor then I get the ...
by Rainer
Fri Feb 19, 2010 6:55 pm
Forum: ZoneMinder 1.24.x
Topic: ZM 1.242 on SuSe 11.1 doesn't start
Replies: 9
Views: 4077

After changing Kernel paramters ZM starts but black

I changed the shared memory settings and some other settings and now ZM starts without error. Never the less I only get a black screen or a flickering screen. I tried different monitor settings but none brings a proper picture. I have 2 different kind of cameras connected but same result. I tried to...
by Rainer
Wed Feb 17, 2010 3:49 pm
Forum: ZoneMinder 1.24.x
Topic: ZM 1.242 on SuSe 11.1 doesn't start
Replies: 9
Views: 4077

New installation

I uninstalled ZM and reinstalled it from scratch but this time with the rpm package with ffmpeg. I still receive a failed when I start zm. I executed chmod 777 /dev/video* I could find in the apache/error_log the following entry [error] Failed to change_hat to 'HANDLING_UNTRUSTED_INPUT' Here /var/lo...
by Rainer
Wed Feb 17, 2010 12:45 am
Forum: ZoneMinder 1.24.x
Topic: ZM 1.242 on SuSe 11.1 doesn't start
Replies: 9
Views: 4077

ZM 1.242 on SuSe 11.1 doesn't start

I installed the rpm package without ffmpeg on SuSe 11.1 64-Bit When I try to start zm I got the message zmwatch[2716].ERR [Can't get shared memory id '7a6d0001', 1: No such file or directory] After adding to /etc/sysctl.conf kernel.shmall = 134217728 kernel.shmmax = 134217728 this message doesn't ap...