ZoneMinder Forums

We have a remote Zoneminder installed and working: + on an old PC + on one 40 Gb hard disk + with one USB camera, pointed at a parking area + set to Function in Monitor mode, no recording + 8 users view this camera occasionally to find available parking spaces + using web browsers on computers + usi...

Thanks.

According to zmu -d /dev/video0 -q -v ... Video Device: /dev/video0 General Capabilities Driver: uvcvideo Card: HD Pro Webcam C920 Bus: usb-0000:00:1d.7-2 Version: 3.2.18 Type: 0x4000001 Supports video capture (X) Does not support video output Does not support frame buffer overlay Does not support V...

I want to install ZoneMinder on a existing Ubuntu system. This Ubuntu system has one 40 Gb hard disk /dev/sda. I want add a second 500 Gb hard disk /dev/sdb and use it exclusively for ZoneMinder. After installation, how do you configure ZoneMinder so that it uses sdb for (almost) everything? The goa...

I have one of these cams as well. The Presets work for the 320x240 and you can tweak those for 480x360 and it works fine too. However, any time I try 640x480, whether I use presets or tweaked settings... I lose the connection to the camera. If I were you I would try running it at the lower resoluti...

According to the following logs, the "Processing" rate is always less than the "Capturing" rate. ............ Jun 27 16:17:33 ubuntu04 zma_m2[1895]: INF [1_Axis_1031_W: 191000 - Processing at 27.78 fps] Jun 27 16:17:54 ubuntu04 zmc_m2[1892]: INF [1_Axis_1031_W: 207000 - Capturing...

So right now, I only have one monitor for this Axis M1031-W Network Camera. When I click on the name of this monitor, the new window pops up with the video stream and the event table below it with the Id, Name, Time, Secs, Frame, Score. All that is fine. But between the video stream and the event ta...

Whats in zm logs? Also did you set shared mem? I started with the shared mem. Added these 2 lines to the "/etc/sysctl.conf " file. kernel.shmall = 134217728 kernel.shmmax = 134217728 Restarted the system. Now the Source 192.168.43.84 is green in color. Also, looking into the logs. Thanks,...

I am trying to setup an Axis M1031-W Network Camera. [General] Source = Remote [Source] Remote Protocol = HTTP Remote Method = Simple Remote Host Name = user:pass@192.168.43.84 Remote Host Port = 80 Remote Host Path = /mjpg/video.mjpg Remote Host SubPath Remote Image Colours = 24 bit colour Capture ...

It looks like "/usr/sbin/nullmailer-send" was sending out these messages and the following files contained those logs: /var/log/syslog /var/log/mail.info /var/log/mail.log /var/log/mail.err /var/log/mail.warn So I uninstalled the "nullmailer" package. The "/var/log/mail.*&qu...

We have this ZM installation running on a small LAN with only 2 computers: 1. Running only ZM (server) 2. A desktop Very simple, nothing elaborate. On the ZM system the "/var/log/mail.log" contains a ton of messages like: ... May 5 20:08:42 ZM1 nullmailer[14286]: smtp: Failed: Connect fail...

Yes, thank you. It should be "Source /dev/video0" and the user "www-data" should be added to the "video" group usermod -a -G video www-data This will ensure that the user "www-data" can read/write the "/dev/video0" Also, thanks to Curtis at Bluecherr...

I did restart ZoneMinder.
I reboot the system.
Still have the same problem.

My system recognizes the PV-143 card correctly: find /dev -name video* /dev/video0 /dev/.udev/db/video4linux:video0 /dev/.udev/db/video4linux:vbi0 lspci -v | grep Multimedia 01:07.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 01:07.1 Multimedia controller: Brooktr...

We have:

• * ZoneMinder running on a Ubuntu PC.
  * The PC has no PCI slots and 4 USB ports.
  * A few different digital video cameras with only RCA yellow jack output.

Can you recommend a USB Video Capture device that:

• * Takes RCA yellow jack input.
  * Is known to work with ZoneMInder.