ZoneMinder Forums

I have been running a Zoneminder server for many years. Until recently I had only one PV-149 from Bluecherry with 4 ports at 640x480 YUV422P @ 30fps. It has been running just fine. My server is configured as follows: OpenSuSE 11.4 Zoneminder 1.25.0 Motherboard: ASROCK Wolfdale1333-D667 Intel(R) Core...

Cross-posting for better coverage... I'm looking for recommendations for a turn key, pre-loaded DVR System base on ZoneMinder, preferably using fan less H/W. I have been using ZoneMinder for a few years now and it has performed very well (despite a few glitches). However, I have grown tired of patch...

I'm looking for recommendations for a turn key, pre-loaded DVR System base on ZoneMinder, preferably using fan less H/W. I have been using ZoneMinder for a few years now and it has performed very well (despite a few glitches). However, I have grown tired of patching up and swapping out hardware. My ...

Thanks for the suggestion... You are correct! My mistake... I did connect the cable to the wrong port (of the two)... Looking at it while the card is in your hands versus when it is inserted in the computer and you're bent over backwards trying to read the ports' labels is a different thing... And t...

Also in case it might help, in the zm console I have defined my 4 monitors /dev/video0, /dev/video1, /dev/video2, /dev/video3 all using channel0 and when watching the 4 blue screens in montage each windows reports 40fps 75% of the time and 20fps 25% of the time... They seem to randomly alternate in ...

In case this helps, here's the output from dmesg | grep bttv: bttv: driver version 0.9.17 loaded bttv: using 16 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 0000:05:08.0, irq: 23, latency: 32, mmio: 0xfcffe000 bttv0: detected: Provideo PV150A-1...

I'm running ZoneMinder 1.23.3 on OpenSuSE 11. Everything was working fine on a simple noname single BTTV878 4 port card. I recently ordered a PV-149 with 4 BTTV878 chips on it to feed higher FPS from my 4 X10 cameras... I removed the noname single chip BTTV card and inserted the new PV-149, thinking...