ZoneMinder Forums

Hi I've connected a Gransdtream GXV3611HD to Zoneminder via FFMPEG as I can't get anywhere with the Remote/RTSP configuration. When using FFMPEG I see varying levels of frame corruption/noise in Zoneminder, i.e. the top half (varies) of the image is great, but then the bottom half is repeats of the ...

Hi

I'll confirm tomorrow, but I have to say that it looks as if that may have fixed the problem.

Thanks

Steve

Hi

These setting do not help, same problems. I had to set the frame rate on the camera to 4fps as 5 is not an option for selection.

Any other ideas?

Thanks

Steve

Hi Yep, thats the exact same error that I am seeing. I have posted my log here: http://www.zoneminder.com/forums/viewtopic.php?f=29&t=21656 It's such as shame as these cameras seem perfect in every other way and are great value for money. At least I now know that V1.26 does not solve the problem...

Hi I'm running ZoneMinder 1.25.0 as packaged with Debian wheezy. I have an HikVision 3MP camera which I cannot configure using RTSP and am therefore using an FFMPEG connection. Zoneminder does capture / display the stream but it keeps ghosting/corrupted/dropping out. I have tried two difference comp...

Hi I am also having a problem with the HikVision camera, in my case I am working with the DS-2CD2132-I 3Mp IP Camera. I cannot configure Zoneminder using the Remote/RTSP method. I have upgraded the firmware in the camera to the current release V5.0.5 but still no luck. I found some comments on this ...

Hi

Also, if you are running on port 10000, then I would guess that you will need to change the Cam Viewer port to 10000 also.

Steve

Hi I am using a different URL. Cam Viewer: IP: whatever Port: 80 Username: <leave> Password: <leave> Cam Num: 1&user=<username>&pass=<password> I found that the ZoneMinder authentication settings made little difference, but incase it helps I am currently running with the following: OPT_USE_A...

Hi I came to the same conclusion having received a reply from the authors of Cam Viewer. Works beautifully. I messed around with all the authentication methods but the only thing that really ended up being important was passing the user and pass in the camera number field. Hopefully we can get somet...

Hi Blazer / All I have installed the Cam Viewer application on my iPhone per your recommendation but I am having problems getting it to work with Zoneminder when I have authentication enabled in Zoneminder. If I disable authentication everything works extremely well. As soon as I enable the user aut...

Hi Rakhbari

I was wondering if you ever created the command script for this camera and if so, would you be prepared to share it?

Thanks

Steve