settings on server - no X

Stefano · Post by **Stefano** » Tue Oct 28, 2008 12:52 pm

hello everybody!

Hope this was not a FAQ..anyway:

I have 1 client (gentoo,kde), 1 server (gentoo, no X)
when I enter http://myServerIP/zoneminder/index.php and click on the name of the monitor just created, the video box says "no video" and the status is "inactive". Why?
My card has 4 connectors so I tried them all with no result.
I guess that additional infos should be provided, but please let me know which ones, I prefere not to post tons of useless parameters.

bye, Stefano.

My logs (last lines):

zmdc:
10/28/08 14:34:58.481599 zmdc[20521].INF ['zmc -d /dev/video0' starting at 08/10/28 14:34:58, pid = 21453]
10/28/08 14:34:58.621460 zmdc[20521].ERR ['zmc -d /dev/video0' exited abnormally, exit status 255]
10/28/08 14:35:09.782740 zmdc[20521].INF ['zmc -d /dev/video0' starting at 08/10/28 14:35:09, pid = 21457]
10/28/08 14:35:09.920963 zmdc[20521].ERR ['zmc -d /dev/video0' exited abnormally, exit status 255]
10/28/08 14:35:21.083872 zmdc[20521].INF ['zmc -d /dev/video0' starting at 08/10/28 14:35:21, pid = 21461]
10/28/08 14:35:21.222702 zmdc[20521].ERR ['zmc -d /dev/video0' exited abnormally, exit status 255]

zmwatch:
10/28/08 14:36:50.214746 zmwatch[20553].ERR [Can't get shared memory id '7a6d0001', 1: No such file or directory]
10/28/08 14:36:50.216723 zmwatch[20553].INF [Restarting capture daemon for Nuovo, shared memory not valid]
10/28/08 14:36:51.503645 zmwatch[20553].INF ['zmc -d /dev/video0' starting at 08/10/28 14:36:51, pid = 21501]
10/28/08 14:37:01.511894 zmwatch[20553].ERR [Can't get shared memory id '7a6d0001', 1: No such file or directory]
10/28/08 14:37:01.513879 zmwatch[20553].INF [Restarting capture daemon for Nuovo, shared memory not valid]
10/28/08 14:37:02.805567 zmwatch[20553].INF ['zmc -d /dev/video0' starting at 08/10/28 14:37:02, pid = 21505]
10/28/08 14:37:12.813014 zmwatch[20553].ERR [Can't get shared memory id '7a6d0001', 1: No such file or directory]
10/28/08 14:37:12.814996 zmwatch[20553].INF [Restarting capture daemon for Nuovo, shared memory not valid]
10/28/08 14:37:14.110712 zmwatch[20553].INF ['zmc -d /dev/video0' starting at 08/10/28 14:37:14, pid = 21509]

the output of
# zmu -q -d /dev/video0 -v
is

Video Capabilities
Name: vivi
Type: 1
Can capture
Video Channels: 1
Audio Channels: 0
Maximum Width: 1024
Maximum Height: 768
Minimum Width: 48
Minimum Height: 32
Window Attributes
X Offset: 0
Y Offset: 0
Width: 640
Height: 480
Picture Attributes
Palette: 8 - YUYV
Colour Depth: 16
Brightness: 32639
Hue: 32896
Colour :32639
Contrast: 4112
Whiteness: 0
Channel 0 Attributes
Name: Camera
Channel: 0
Flags: 0
Type: 2 - Camera
Format: 1 - NTSC

Eclipx · Post by **Eclipx** » Mon Jan 19, 2009 11:42 pm

I seem to be in the same boat at you currently, and I wonder if you ever found a solution yet. I will post my specs/logs separately later today, but thought I would check with some other users first.

nuck · Post by **nuck** » Wed Jan 21, 2009 4:52 am

Seems you may have one of "those" cards that aren't particularly well documented.

Here's what I dug up with a quick google search. http://lists.zerezo.com/video4linux/msg13322.html

If you can get it working with v4l and displaying properly with xawtv (or something similar) it should work fine with zoneminder. Bottom line, get the card working and proven to work and then tackle zoneminder.

Nurech · Post by **Nurech** » Fri Jan 23, 2009 12:47 pm

I'm in a same pickle. XawTV works fine wit the stream, it's just that I can't get feed nor image on ZM. Read my other thread on 1.24.x forum.

nuck · Post by **nuck** » Fri Jan 23, 2009 3:59 pm

Nurech wrote:I'm in a same pickle. XawTV works fine wit the stream, it's just that I can't get feed nor image on ZM. Read my other thread on 1.24.x forum.

What do the logs have to say? If the card is working with v4l the logs should give some indication of what is going on (or not).

liviab · Post by **liviab** » Fri Jan 23, 2009 4:59 pm

I think I'm with the same problem because the ZM doesn't show no image.
The message log says:

Jan 23 14:44:46 localhost zmwatch[4797]: INF [Restarting capture daemon for New, time since last capture 9 seconds (1232729086-1232729077)]
Jan 23 14:44:46 localhost zmdc[11735]: INF ['zmc -d /dev/video0' started at 09/01/23 14:44:46]
Jan 23 14:44:46 localhost zmc_dvideo0[11735]: INF [Debug Level = 0, Debug Log = <none>]
Jan 23 14:44:46 localhost zmdc[4748]: INF ['zmc -d /dev/video0' starting at 09/01/23 14:44:46, pid = 11735]
Jan 23 14:44:46 localhost zmwatch[4797]: INF ['zmc -d /dev/video0' starting at 09/01/23 14:44:46, pid = 11735]
Jan 23 14:44:46 localhost zmc_dvideo0[11735]: INF [Starting Capture]
Jan 23 14:44:47 localhost zmc_dvideo0[11735]: ERR [Sync failure for frame 1 buffer 2(1): Invalid argument]
Jan 23 14:44:47 localhost zmc_dvideo0[11735]: ERR [Failed to post-capture monitor 0]
Jan 23 14:44:47 localhost zmdc[4748]: ERR ['zmc -d /dev/video0' exited abnormally, exit status 255]

The camera is working fine with xawtv, vlc and cheese.
The command zmu -q -d /dev/video0 -v shows:

Video Capabilities
Name: USB Camera (041e:4051)
Type: 1
Can capture
Video Channels: 1
Audio Channels: 0
Maximum Width: 640
Maximum Height: 480
Minimum Width: 48
Minimum Height: 32
Window Attributes
X Offset: 0
Y Offset: 0
Width: 320
Height: 240
Picture Attributes
Palette: 0 - Unknown
Colour Depth: 8
Brightness: 32896
Hue: 0
Colour :0
Contrast: 32768
Whiteness: 26214
Channel 0 Attributes
Name: zc3xx
Channel: 0
Flags: 0
Type: 2 - Camera
Format: 0 - PAL

Maybe it is useful for someone helping me.

Lee Sharp · Post by **Lee Sharp** » Fri Jan 23, 2009 5:01 pm

xawtv can use v4l2, but zoneminder is only v4l, so that could be your problem. Also, usb has a nasty habit of moving with each reboot.

liviab · Post by **liviab** » Fri Jan 23, 2009 5:20 pm

ok, but the command v4l-info shows this:

### v4l2 device info [/dev/video0] ###
general info
VIDIOC_QUERYCAP
driver : "zc3xx"
card : "USB Camera (041e:4051)"
bus_info : "0000:00:1d.0"
version : 2.2.0
capabilities : 0x5000001 [VIDEO_CAPTURE,READWRITE,STREAMING]

standards

inputs
VIDIOC_ENUMINPUT(0)
index : 0
name : "zc3xx"
type : CAMERA
audioset : 0
tuner : 0
std : 0x0 []
status : 0x0 []

video capture
VIDIOC_ENUM_FMT(0,VIDEO_CAPTURE)
index : 0
type : VIDEO_CAPTURE
flags : 1
description : "JPEG"
pixelformat : 0x4745504a [JPEG]
VIDIOC_G_FMT(VIDEO_CAPTURE)
type : VIDEO_CAPTURE
fmt.pix.width : 320
fmt.pix.height : 240
fmt.pix.pixelformat : 0x4745504a [JPEG]
fmt.pix.field : NONE
fmt.pix.bytesperline : 320
fmt.pix.sizeimage : 29390
fmt.pix.colorspace : JPEG
fmt.pix.priv : 1

controls
VIDIOC_QUERYCTRL(BASE+0)
id : 9963776
type : INTEGER
name : "Brightness"
minimum : 0
maximum : 255
step : 1
default_value : 128
flags : 0
VIDIOC_QUERYCTRL(BASE+1)
id : 9963777
type : INTEGER
name : "Contrast"
minimum : 0
maximum : 256
step : 1
default_value : 128
flags : 0

### video4linux device info [/dev/video0] ###
general info
VIDIOCGCAP
name : "USB Camera (041e:4051)"
type : 0x1 [CAPTURE]
channels : 1
audios : 0
maxwidth : 640
maxheight : 480
minwidth : 48
minheight : 32

channels
VIDIOCGCHAN(0)
channel : 0
name : "zc3xx"
tuners : 0
flags : 0x0 []
type : CAMERA
norm : 0

tuner
ioctl VIDIOCGTUNER: Invalid argument

audio
ioctl VIDIOCGAUDIO: Invalid argument

picture
VIDIOCGPICT
brightness : 32896
hue : 0
colour : 0
contrast : 32768
whiteness : 26214
depth : 8
palette : unknown

buffer
ioctl VIDIOCGFBUF: Invalid argument

window
VIDIOCGWIN
x : 0
y : 0
width : 320
height : 240
chromakey : 0
flags : 0

This way, with what I know, the v4l is recognizing the camera. Isn't it?