Axis 206 Network camera get after some time only blank image

Post here to ask any questions about hardware suitability, configuration in ZoneMinder, or experiences. If you just want to know if something works with ZoneMinder or not, please check the Hardware Compatibility sections in the forum, and the Wiki first. Also search this topic as well.
Post Reply
luke
Posts: 11
Joined: Wed Mar 09, 2005 2:57 pm
Location: Czech Republic
Contact:
Contact luke

Axis 206 Network camera get after some time only blank image

Post by luke »

Hi,

I've axis 206 network camera working with ZM 1.21, everything is fine - no problems. But after some time (approximately 1 day) camera produce only blank images, web interface of camera normally works but there is no image. There is only one solution I've found to solve this... restart the camera.
Does anybody know any other solutions?

Thanks
Lukas
Top
User avatar
voronwe
Posts: 193
Joined: Tue Jan 18, 2005 12:40 am
Location: Copenhagen Denmark

Post by voronwe »

Hey Luke

What firmware version do you run on your Axis 206 Camera ???

I have just updated mine to the latest version from the Axis Website, witch is 4.20, this might solve your problem, try it out and see.
Best Regards
Tom Stage
Top
luke
Posts: 11
Joined: Wed Mar 09, 2005 2:57 pm
Location: Czech Republic
Contact:
Contact luke

Post by luke »

Yeah I've just updated the firmware to 4.20. I'm monitoring it now.....
Lukas
Top
Post Reply

Return to “Hardware Queries”