Hello everyone. I came across an IP camera by the name of 'YoLuke', and I've been trying to add it to my ZM 1.30.4 install, with no luck. While not listed on the supported hardware, I'd like to be able to get this camera recording. Manufacturer says works with ZM, but can't find any documentation. Anyone have any success adding this camera?
Video Compression: H.265 main profile, AVI format, Support RTSP
https://www.amazon.com/dp/B07QPYGCWR/re ... 5Cb7TEPE1W
Any luck adding YoLuke IP camera?
Re: Any luck adding YoLuke IP camera?
Hmmm...figures. Working on this and just moments after posting, I've downloaded ONVIF Device Manager from https://sourceforge.net/projects/onvifdm/ , entered the IP of the camera, and went to "Live Video" link which shows the RTSP address. Entered RTSP in ZM and BOOM! Video! ![Smile :)](./images/smilies/icon_smile.gif)
![Smile :)](./images/smilies/icon_smile.gif)
Re: Any luck adding YoLuke IP camera?
Hello,
a little bit late, but I got it working.
I use as adress a combination from username, pwd, ip, port and channel. I've found the tipp at another website. It was for another product but I've tried it at my homesetup and it works. I use a Yolukle P3-4X and a Yoluke P1-4X.
Example:
rtsp://user:password@192.168.1.2:554/11
Explanation:
rtsp:// - the protocoll to use
user - username from your camera (user for weblogin)
password - password from your camera (password for weblogin)
@192.168.1.2:554 - your camera ip and configured rtsp port (you can check it in the network options on the webinterface of the camera)
/11 - channel (I don't know why channel 11, but it works....)
a little bit late, but I got it working.
I use as adress a combination from username, pwd, ip, port and channel. I've found the tipp at another website. It was for another product but I've tried it at my homesetup and it works. I use a Yolukle P3-4X and a Yoluke P1-4X.
Example:
rtsp://user:password@192.168.1.2:554/11
Explanation:
rtsp:// - the protocoll to use
user - username from your camera (user for weblogin)
password - password from your camera (password for weblogin)
@192.168.1.2:554 - your camera ip and configured rtsp port (you can check it in the network options on the webinterface of the camera)
/11 - channel (I don't know why channel 11, but it works....)
-
- Posts: 1
- Joined: Mon Jul 20, 2020 8:02 am
Re: Any luck adding YoLuke IP camera?
Thank you very much for the explanation. It works now.
online resume examples for freshers
Re: Any luck adding YoLuke IP camera?
So I just got this camera hooked up today. I set the control to use the Netcat ONVIF which does control it but it doesn't seem to want to stop. Anyone know of a better profile for controlling the camer?