I have a GW Security 5071IP and I can't get zoneminder to control the PTZ. This is my first camera and install. The camera is supposed to be ONVIF, but the detection doesn't seem to work. The web interface for the camera shows PTZ config for PELCO_D, PELCO_P, MOLYN_D, SANTA_P. I've tried PELCO_D over ffmpeg with no luck with many ports. Both with and without credentails.
nmap shows these ports:
Code: Select all
PORT STATE SERVICE
80/tcp open http
554/tcp open rtsp
8000/tcp open http-alt
8091/tcp open unknown
8200/tcp open trivnet1
I also see the following in the logs:
Code: Select all
Can't connect: Connection refused after 11 attempts to /var/run/zm/zmcontrol-2.sock
Code: Select all
/usr/bin/zmcontrol.pl --panspeed=26 --autostop --command=moveConRight --id=2=>
Specific version of zoneminder is 1.30.4-xenial1
Any help or pointers would be appreciated.
Thanks