Autotracking

Anything you want added or changed in future versions of ZoneMinder? Post here and there's a chance it will get in! Search to make sure it hasn't already been requested.
Post Reply
thecatman
Posts: 2
Joined: Fri Apr 07, 2017 8:31 am
Location: Padua

Autotracking

Post by thecatman » Fri Apr 07, 2017 10:02 am

Hi!
It would be fantastic to have an autotracking feature like professional ipcam.
Thanks.

User avatar
iconnor
Posts: 1228
Joined: Fri Oct 29, 2010 1:43 am
Location: Toronto
Contact:

Re: Autotracking

Post by iconnor » Sat Apr 08, 2017 2:00 pm

zm does have this feature. Not sure how well it works.

thecatman
Posts: 2
Joined: Fri Apr 07, 2017 8:31 am
Location: Padua

Re: Autotracking

Post by thecatman » Mon Apr 10, 2017 10:11 am

sorry! i'm new on linux and zm. i buy 3 Foscam FI9928P and i try to setup they. i'm reading a lot of "how-to"!

itsystemmasters
Posts: 2
Joined: Sat Apr 22, 2017 10:05 pm

Re: Autotracking

Post by itsystemmasters » Sat Apr 22, 2017 10:14 pm

Hi,
How did you configure FI9928P in zoneminder? I have bought this model and tried setup it in zoneminder (ver. 1.30.2) and it wasn't working.
My config:
Source type: ffmpeg
Source path: rtsp://myuser:mypasswd@192.168.1.225:88/videoMain
Remote Method: TCP
Options: <nothing>
Target colorspace: 32 bits
Width: 1920
Height: 1080
If I use url in VLC it's working, but in zonemider no.
Please help me!

User avatar
iconnor
Posts: 1228
Joined: Fri Oct 29, 2010 1:43 am
Location: Toronto
Contact:

Re: Autotracking

Post by iconnor » Sun Apr 23, 2017 12:14 pm

That looks correct to me. You will need to look in the logs. Do you have enough ram? That resolution will use up a lot of /dev/shm.

itsystemmasters
Posts: 2
Joined: Sat Apr 22, 2017 10:05 pm

Re: Autotracking

Post by itsystemmasters » Sun Apr 23, 2017 12:53 pm

Thanks a lot for answer. Yesterday, I found issue, my password contained ! symbol and it was problem. After password changing it is working fine. Also, I am able to control PTZ, but track motion isn't working. I have checked Track motion in Control tab, but camera didn't move (rotate). My config in attach.
control.png
control.png (22.99 KiB) Viewed 4112 times

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest