Can't add usb camera to Zoneminder -1.34.18-focal1

Forum for questions and support relating to the 1.34.x releases only.
Post Reply
User avatar
bkjaya1952
Posts: 107
Joined: Sat Aug 25, 2018 3:24 pm
Location: Sri Lanka
Contact:

Can't add usb camera to Zoneminder -1.34.18-focal1

Post by bkjaya1952 » Fri Aug 07, 2020 4:35 pm

Zoneminder 1.34.18-focal1 issued on (2020-08-06)

When I try to add USB camera monitor to ZM-Consol , I have got a popup message stating "Palette must be set to a valid value & Format must be set to a valid value" .
I have set Device format = 255 & Capture palette to 0
The similar problem was in Zoneminder master 1.35.5~20200714143209-focal and corrected after the release of Zoneminder master 1.35.5~20200721193536-focal . Please refer the following link
viewtopic.php?f=42&t=29724
Screenshot from 2020-08-07 21-54-44.png
Screenshot from 2020-08-07 21-54-44.png (64.32 KiB) Viewed 383 times

bbunge
Posts: 2704
Joined: Mon Mar 26, 2012 11:40 am
Location: Pennsylvania

Re: Can't add usb camera to Zoneminder -1.34.18-focal1

Post by bbunge » Fri Aug 07, 2020 7:18 pm

Yes, looks like the "normal" values have gotten messed up.

User avatar
bkjaya1952
Posts: 107
Joined: Sat Aug 25, 2018 3:24 pm
Location: Sri Lanka
Contact:

Re: Can't add usb camera to Zoneminder -1.34.18-focal1

Post by bkjaya1952 » Sun Aug 09, 2020 5:00 pm

You can add usb camera monitor by editing the codes of Device Format and Palette manually by the procedure suggested by aparajit in the following post for Zoneminder master 1.35.5~20200714143209-focal . Please refer the following link .

viewtopic.php?f=42&t=29724

I think , the method adopted by Mr Isaac to solve the usb camera problem in Zoneminder master 1.35.5~20200714143209-focal , may be used for Zoneminder -1.34.18-focal1 also
Attachments
Screenshot from 2020-08-09 22-15-36.png
Screenshot from 2020-08-09 22-15-36.png (318.77 KiB) Viewed 333 times

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests