Unusable picture (b/w and shifted) using 1.34

[tarkhil]

Hello

I have two cams and perfectly working with them ZoneMinder 1.30. I've built 1.34, reconnected and got totally unusable picture.

First, it's b/w instead of color.

Second... I don't know how to name it in English.

https://alpha.infotel.ru/index.php/s/tySeb9OtJnEP4EU

I have no idea on how could it be and what to do...

[iconnor]

Check you colour/width/height in the monitor settings. They are wrong. Your logs are probably telling you this.

[tarkhil]

Originally, it was the same 1780x720 24 bit colour. Nothing usable found in logs, setting color to 256 gray or 32 bit colour yields less usable picture (with color in 32-bit mode, though)

[Bluemax]

Change the 1280 in +/-8 steps like 1272, 1288, 1296... The skew should reduce in one direction.

[mikb]

(Assuming your doors are vertical!)

Zooming in, it looks like it's off by *1* pixel per line (declared width 1 pixel less than actual width), and it IS in colour, but seems to be using some weird colour palette of 7 pastel colours, which is not the best ...