Page 1 of 1

ReoLink RLC-420-5MP connection

Posted: Tue Jan 07, 2020 11:06 pm
by rtalada
Here is how I have the camera setup in my environment

First thing to do is define the IP address.
I found that adding the device to dhcp using manual allocation worked quite well considering that no initial IP address was provided.

Log on to the camera using the assigned IP address
Username: admin
no password

Camera variables:
Basic Settings:
Stream: Clear
Resolution: 2048 x 1536
Frame Rate: 30
Max Bitrate: 6144
H.264 Profile: Main
Stream: Fluent
Resolution: 640 x 480
Frame Rate: 10
Max Bitrate: 160
H.264 Profile: Main

Zoneminder Variables:
General:
Source Type: Ffmpeg
Max FPS (?): null
Alarm Max FPS (?): null
Source:
Source Path: rstp://{username:password}@{IPaddress}
Method (?): TCP
Options (?): /h264Preview_01_main
Capture Width: 640
Capture Height: 480

Re: ReoLink RLC-420-5MP connection

Posted: Wed Jan 08, 2020 9:42 am
by banzaay
Hi,

I have configured the Reolink RLC-511W, this is my configuration:

Zoneminder Variables:
  • General:
Source Type: Ffmpeg
Max FPS (?): null
Alarm Max FPS (?): null
  • Source:
Source Path: rtsp://admin:PWD@192.168.1.51/h264Preview_01_sub (this is for the Stream Fluent,ohterwise you can use rtsp://admin:PWD@192.168.1.51/h264Preview_01_main with resolution 2560x1920)
Method (?): TCP
Options (?): null
Capture Width: 640
Capture Height: 480

Mirko

Re: ReoLink RLC-420-5MP connection

Posted: Fri Nov 13, 2020 8:14 am
by FFRRRR
here is a detailed configuration process I find in the reddit. May it helps you.
https://www.reddit.com/r/reolinkcam/com ... inder_nvr/