HD Analogue camera install
Posted: Thu Jan 02, 2020 1:08 pm
I am trying to use zoneminder to monitor a set of four Annke 4K HD analogue CCTV cameras, however I cannot get the system to display images the output log from zm is as follows:
zoneminder.service - ZoneMinder CCTV recording and surveillance system
Loaded: loaded (/lib/systemd/system/zoneminder.service; enabled; vendor preset: enabled)
Active: active (running) since Thu 2020-01-02 11:42:44 GMT; 12s ago
Process: 3398 ExecStop=/usr/bin/zmpkg.pl stop (code=exited, status=0/SUCCESS)
Process: 3413 ExecStart=/usr/bin/zmpkg.pl start (code=exited, status=0/SUCCESS)
Main PID: 3427 (zmdc.pl)
Tasks: 9 (limit: 4525)
CGroup: /system.slice/zoneminder.service
├─3427 /usr/bin/perl -wT /usr/bin/zmdc.pl startup
├─3453 /usr/bin/zmc -m 1
├─3457 /usr/bin/perl -wT /usr/bin/zmfilter.pl --filter_id=1 --daemon
├─3462 /usr/bin/perl -wT /usr/bin/zmfilter.pl --filter_id=2 --daemon
├─3466 /usr/bin/perl -wT /usr/bin/zmaudit.pl -c
├─3473 /usr/bin/perl -wT /usr/bin/zmwatch.pl
├─3479 /usr/bin/perl -w /usr/bin/zmupdate.pl -c
├─3484 /usr/bin/perl -w /usr/bin/zmtelemetry.pl
└─3489 /usr/bin/perl -wT /usr/bin/zmstats.pl
Jan 02 11:42:58 mario-Satellite-L350 zmc_m1[3453]: INF [zmc_m1] [Failed to capture image from monitor 1 Monitor-1 (1/1)]
Jan 02 11:42:58 mario-Satellite-L350 zmc_m1[3453]: ERR [zmc_m1] [Invalid response status 404: Not Found]
Jan 02 11:42:58 mario-Satellite-L350 zmc_m1[3453]: ERR [zmc_m1] [Unable to get response, disconnecting]
Jan 02 11:42:58 mario-Satellite-L350 zmc_m1[3453]: INF [zmc_m1] [Return from Capture (-1), signal loss]
Can anyone shed any light on this in order to help me find the problem, thank you.
PS I am a complete novice, so please any help will be very much appreciated.
zoneminder.service - ZoneMinder CCTV recording and surveillance system
Loaded: loaded (/lib/systemd/system/zoneminder.service; enabled; vendor preset: enabled)
Active: active (running) since Thu 2020-01-02 11:42:44 GMT; 12s ago
Process: 3398 ExecStop=/usr/bin/zmpkg.pl stop (code=exited, status=0/SUCCESS)
Process: 3413 ExecStart=/usr/bin/zmpkg.pl start (code=exited, status=0/SUCCESS)
Main PID: 3427 (zmdc.pl)
Tasks: 9 (limit: 4525)
CGroup: /system.slice/zoneminder.service
├─3427 /usr/bin/perl -wT /usr/bin/zmdc.pl startup
├─3453 /usr/bin/zmc -m 1
├─3457 /usr/bin/perl -wT /usr/bin/zmfilter.pl --filter_id=1 --daemon
├─3462 /usr/bin/perl -wT /usr/bin/zmfilter.pl --filter_id=2 --daemon
├─3466 /usr/bin/perl -wT /usr/bin/zmaudit.pl -c
├─3473 /usr/bin/perl -wT /usr/bin/zmwatch.pl
├─3479 /usr/bin/perl -w /usr/bin/zmupdate.pl -c
├─3484 /usr/bin/perl -w /usr/bin/zmtelemetry.pl
└─3489 /usr/bin/perl -wT /usr/bin/zmstats.pl
Jan 02 11:42:58 mario-Satellite-L350 zmc_m1[3453]: INF [zmc_m1] [Failed to capture image from monitor 1 Monitor-1 (1/1)]
Jan 02 11:42:58 mario-Satellite-L350 zmc_m1[3453]: ERR [zmc_m1] [Invalid response status 404: Not Found]
Jan 02 11:42:58 mario-Satellite-L350 zmc_m1[3453]: ERR [zmc_m1] [Unable to get response, disconnecting]
Jan 02 11:42:58 mario-Satellite-L350 zmc_m1[3453]: INF [zmc_m1] [Return from Capture (-1), signal loss]
Can anyone shed any light on this in order to help me find the problem, thank you.
PS I am a complete novice, so please any help will be very much appreciated.