Trouble connecting UVC-G3 to zoneminder

Forum for questions and support relating to the 1.32.x releases only.
Post Reply
krizzle
Posts: 19
Joined: Tue Oct 30, 2018 6:07 pm

Trouble connecting UVC-G3 to zoneminder

Post by krizzle »

I just set up zoneminder and I am trying to connect a Ubiquiti UVC-G3 camera that is on the network. I followed the Zoneminder setup documentation and have the proper IP/RTSP address for the camera. I viewed the camera through VLC just to make sure it works and it does but when I add the camera to ZM it shows no video. ZM does say it is capturing but shows 0 fps and 0B/s. Has anyone set up a camera similar to this before and can give me some tips?

Attached images are my settings.
Attachments
ZM1.JPG
ZM1.JPG (16.25 KiB) Viewed 6021 times
ZM2.JPG
ZM2.JPG (48.27 KiB) Viewed 6021 times
ZM3.JPG
ZM3.JPG (41.96 KiB) Viewed 6021 times
krizzle
Posts: 19
Joined: Tue Oct 30, 2018 6:07 pm

Re: Trouble connecting UVC-G3 to zoneminder

Post by krizzle »

Anyone?
jsylvia007
Posts: 116
Joined: Wed Mar 11, 2009 8:32 pm

Re: Trouble connecting UVC-G3 to zoneminder

Post by jsylvia007 »

I have the Dome version of this camera and these are my settings. I use RTSP w/ ffmpeg:
Image01.png
Image01.png (75.43 KiB) Viewed 5979 times
Image02.png
Image02.png (77.11 KiB) Viewed 5979 times
krizzle
Posts: 19
Joined: Tue Oct 30, 2018 6:07 pm

Re: Trouble connecting UVC-G3 to zoneminder

Post by krizzle »

Works perfectly now! Thanks for the response. Greatly appreciated.
jsylvia007
Posts: 116
Joined: Wed Mar 11, 2009 8:32 pm

Re: Trouble connecting UVC-G3 to zoneminder

Post by jsylvia007 »

krizzle wrote: Sun Nov 04, 2018 9:55 pm Works perfectly now! Thanks for the response. Greatly appreciated.
No problem-o!
Post Reply