adding IPcamera not in the list

Forum for questions and support relating to the 1.30.x releases only.
Post Reply
cjvijf
Posts: 8
Joined: Sun Feb 24, 2019 4:20 pm

adding IPcamera not in the list

Post by cjvijf » Wed May 01, 2019 6:16 am

Hello,
I tried, in several ways, to add an IP cam to the list. It is an onvif camera, I can access it sending XML, with soap/gnu-c

I can also access them in ways like:

rtsp://192.168.1.64:554/user=admin&password='passwd'&channel=1_stream=0.sdp?realstream
rtsp://192.168.1.64:554/user=admin&password='passwd'&channel=1_stream=1.sdp?realstream
rtsp://192.168.1.64:554/user=admin_password='sha1-digest'_channel=1_stream=0.sdp?real_stream
http://192.168.1.64/webcapture.jpg?comm ... rd='passwd'

how do I add a camera like this? (I did browse through the guides a bit, but didn't see anything really).

thanks,

Ron

bbunge
Posts: 2619
Joined: Mon Mar 26, 2012 11:40 am
Location: Pennsylvania

Re: adding IPcamera not in the list

Post by bbunge » Sat May 04, 2019 12:05 am

If you can get the camera to stream in VLC use those settings in Zoneminder ffmpeg. Use VLC (Tools, Media Information, Codec) to check camera Display Resolution to use in Zoneminder.

lbm
Posts: 52
Joined: Mon Mar 26, 2018 7:44 pm

Re: adding IPcamera not in the list

Post by lbm » Mon May 13, 2019 11:36 am

Try with user:pass before the IP, like so.

(This works for mine hikvision cameras)
rtsp://user:password@ip//Streaming/Channels/1

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests