D-Link DCS-942 Question

Forum for questions and support relating to the 1.30.x releases only.
Post Reply
DJJames
Posts: 2
Joined: Thu Apr 13, 2017 6:54 pm

D-Link DCS-942 Question

Post by DJJames » Thu Apr 13, 2017 7:03 pm

Can not get the above cam working with ZM current version. The cam is connected to the router and shows an image in 192.168.1.65 as well as sending video clips and jpeg's via e-mail but I can't get it to activate in ZM (works in D-link web browser page only). I have the settings as "remote" plus I have follwed the wiki config for IP addy password etc etc but still no registration / image in zm. The cam shows on my network system as there as well. I'm sure it's a path issue or some thing like that which I'm doing wrong but I've tried every combination I can think of in setup both on the cam side and zm side but still no joy. Any thoughts? Years ago I had the same cam set up in ZM so I know it's worked in the past. Thank-you.

bbunge
Posts: 2676
Joined: Mon Mar 26, 2012 11:40 am
Location: Pennsylvania

Re: D-Link DCS-942 Question

Post by bbunge » Thu Apr 13, 2017 9:38 pm


User avatar
iconnor
Posts: 1228
Joined: Fri Oct 29, 2010 1:43 am
Location: Toronto
Contact:

Re: D-Link DCS-942 Question

Post by iconnor » Thu Apr 13, 2017 11:36 pm

Look at the logs. They will often tell you things. It's why they exist.

DJJames
Posts: 2
Joined: Thu Apr 13, 2017 6:54 pm

Re: D-Link DCS-942 Question

Post by DJJames » Fri Apr 14, 2017 2:51 am

Thanx for the wiki info but as mentioned i went through that used the input they sugest and still nothing. Here's the log output. Not sure if it says anything helpful.

2017-04-13 17:05:27.374370 zmdc 23354 ERR 'zmc -d /dev/video0' exited abnormally, exit status 255 zmdc.pl
2017-04-13 17:05:27.316794 zmc_dvideo0 32724 ERR No monitors found zmc.cpp 246
2017-04-13 17:05:27.288480 zmdc 23354 ERR 'zmc -d 192.168.1.65' exited abnormally, exit status 255 zmdc.pl
2017-04-13 17:05:27.211620 zmdc 32724 INF 'zmc -d /dev/video0' started at 17/04/13 17:05:27 zmdc.pl
2017-04-13 17:05:27.211380 zmdc 23354 INF 'zmc -d /dev/video0' starting at 17/04/13 17:05:27, pid = 32724 zmdc.pl
2017-04-13 17:05:27.183654 zmc_d192_168_1_65 32723 ERR No monitors found zmc.cpp 246
2017-04-13 17:05:27.121430 zmdc 23354 INF Starting pending process, zmc -d /dev/video0 zmdc.pl
2017-04-13 17:05:27.081210 zmdc 32723 INF 'zmc -d 192.168.1.65' started at 17/04/13 17:05:27 zmdc.pl
2017-04-13 17:05:27.081070 zmdc 23354 INF 'zmc -d 192.168.1.65' starting at 17/04/13 17:05:27, pid = 32723 zmdc.pl
2017-04-13 17:05:27.034340 zmdc 23354 INF Starting pending process, zmc -d 192.168.1.65

User avatar
iconnor
Posts: 1228
Joined: Fri Oct 29, 2010 1:43 am
Location: Toronto
Contact:

Re: D-Link DCS-942 Question

Post by iconnor » Fri Apr 14, 2017 3:12 pm

You have configured it as a local camera, not as a remote camera.

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests