I am new to zoneminder. I have successfully installed 1.25 on CentOS 6.2 and tested with a HIKVision MiniDome Camera. ZM get video stream, using ffmpeg source, from this camera with rtsp with the user name and password embedded into the URL. However, I have the following problems:
1) The motion detection never works. When I set the function to Modect it would not start recording when there is motion. I tested it by walking and jumping in front of the camera. I have tried a few settings from the motion detect zone set up but still the same. However, it will randomly record 1 or 2 seconds of video throughout the day.
2) When I set it to record, it did record but if there was motions, like I walked in front of the camera, the motion is ghostly. That means the motion parts of previous frame(s) is overlayed. I guess there must be a setting to control this.
3) Where can I enable the outlining of the object in motion?
Thanks in advance if anyone can shed some light on these issues!
Alex
A few question on Zoneminder
Re: A few question on Zoneminder
1) Try adjusting using one of the presets in the zone settings.
2) No idea. May be an ffmpeg / MPEG4 issue. Can you try with a jpg or mjpeg feed?
3) Web console: Options, Config: CREATE_ANALYSIS_IMAGES = Ticked
2) No idea. May be an ffmpeg / MPEG4 issue. Can you try with a jpg or mjpeg feed?
3) Web console: Options, Config: CREATE_ANALYSIS_IMAGES = Ticked
Re: A few question on Zoneminder
Thanks for the reply. I suspect ffmpeg too but do not know how to fix it.