Panasonic WV-NM100 Network Camera Not working with ZM

mahendrar · Post by **mahendrar** » Fri Dec 09, 2005 10:22 am

Hello all,

I have got one Network camera Panasonic WV-NM100.

I want to configure it on ZM,but i do not know how to configue it.

I am not able to understand what path i should set to view live stream from camera.

The path which is being used by camera is http://IP/cgi-bin/camera?PATH=<TIMESTAMP> .

Thanks in advance

Mahendra.
________
volcano vaporizers

Post by **zoneminder** » Mon Dec 12, 2005 9:35 am

Can you view that url in a browser directly and get an image? If so then just use it as is, also try it without the timestamp query part.

Phil

mahendrar · Post by **mahendrar** » Mon Dec 12, 2005 9:52 am

Phil i can view the live stream from the camera and when i right click on the camera image i find path http://IP/cgibin/camera?PATH=<TimeStamp>.

I have tested all the possible combinations including the path above except the Timestamp but with no luck.

Thanks,
________
FS1E

jameswilson · Post by **jameswilson** » Mon Dec 12, 2005 10:02 am

if you have a look at my server i have a panasonic cgi manual not sure if this units in there but should give some pointers.
http://217.154.38.122:8080/panasonic/

Post by **zoneminder** » Mon Dec 12, 2005 10:35 am

I assume you are only using /cgibin/camera as the path, and the ip address only (no http:// part) as the host?

Phil

mahendrar · Post by **mahendrar** » Mon Dec 12, 2005 12:02 pm

Yes phil,

I am only using IP address and the /cgi-bin/camera( no http://)

Thanks james for your reply.
I tried all the paths given in your PDF but with no luck.
________
Mercedes-Benz OM602 engine specifications

mlrtime3 · Post by **mlrtime3** » Fri Apr 14, 2006 3:38 pm

just a quick heads up, this camera is up on woot.com now for 199$

vahan1 · Post by **vahan1** » Fri Apr 14, 2006 4:35 pm

I saw the deal on Woot also...

Has anyone gotten these cameras successfully working with Zoneminder??

I'm considering buying a few and need to know before i pull the trigger.

Thanks!
-v

dgsconseil · Post by **dgsconseil** » Sun Apr 23, 2006 9:39 am

as i know embeded webserver in panasonic ip cam are alwaysthe same
try the preset for panasonic before .... this should work

henke · Post by **henke** » Mon Apr 24, 2006 7:29 pm

Hello,

did you get it working?

-h

gsg5forum · Post by **gsg5forum** » Thu Feb 19, 2009 2:36 am

http://www.zoneminder.com/forums/viewtopic.php?t=13133

mjsameth · Post by **mjsameth** » Thu Mar 05, 2009 12:08 am

I have 15 of these cameras working - with the following path...

/cgi-bin/camera?

Hope that helps

ZoneMinder Forums

Panasonic WV-NM100 Network Camera Not working with ZM

Panasonic WV-NM100 Network Camera Not working with ZM

works for me