Page 1 of 1

Smonet system with K8208-W - Help

Posted: Thu Apr 30, 2020 5:37 pm
by carsam
Hello all,

I'm having a heck of a time with this and hoping someone might be able to help me set this straight. Purchased a cheap-ish plug-and-play smonet camera system on amazon with a K8208-W NVR, i'm just trying to get a stream of the cameras to this computer and it doesn't seem like i can figure out if this is even probable.

The manual doesn't mention anything about rtsp or http streams, just that i need to use IE with active X enabled.
I've tried this site with no luck: https://www.ispyconnect.com/man.aspx?n=Hiseeu
i've also shot in the dark and tried all this with no luck: https://community.home-assistant.io/t/s ... 3/35502/35
I've searched this forum and tried a couple of recommendations with other systems to see if they'd work with mine

I've tried these with VLC just so i can test them at first before i try to figure out how to get them in with zoneminder and so far nothing has been working. I've been twiddling around for a couple of days and not making any head way so i figured i'd bite the bullet and post for help...

Any help would be greatly appreciated.

Thanks.

Re: Smonet system with K8208-W - Help

Posted: Wed Jan 06, 2021 10:19 pm
by wilsotc
I'm in the same boat. This thing is basically garbage. If this is even marginally marketable I'm in the wrong business.

Re: Smonet system with K8208-W - Help

Posted: Wed Jan 06, 2021 10:21 pm
by wilsotc
I'll snoop on the camera traffic and see if it's something standard.