tonton 1px2-1329w

Post here to ask any questions about hardware suitability, configuration in ZoneMinder, or experiences. If you just want to know if something works with ZoneMinder or not, please check the Hardware Compatibility sections in the forum, and the Wiki first. Also search this topic as well.
Post Reply
cjvijf
Posts: 8
Joined: Sun Feb 24, 2019 4:20 pm

tonton 1px2-1329w

Post by cjvijf » Sun Feb 24, 2019 4:35 pm

Hello,

I am new to this but I bought this cheap IP camera, tonton 1px2-1329w, just to mess with and see what I could do with it.

It works over my cell phone, I can see a picture. My router says it assigned an IP address to it, ut it does not respond to pings

Also, is there a "generic" URL/URI for watching the stream? I did try with VLC.

Did anyone try this camera? or got it to work with "anything" ?

thanks,

Ron

cjvijf
Posts: 8
Joined: Sun Feb 24, 2019 4:20 pm

Re: tonton 1px2-1329w

Post by cjvijf » Sun Feb 24, 2019 7:47 pm

there was an IP issue, apparently:

so I can see the camera, and also ping it. this is what nmap shows:

Starting Nmap 5.51 ( http://nmap.org ) at 2019-02-24 12:15 MST
Nmap scan report for 192.168.x.y
Host is up (0.045s latency).
Not shown: 997 closed ports
PORT STATE SERVICE
80/tcp open http
554/tcp open rtsp
8899/tcp open ospf-lite

So I am trying to connect to the rstp port, in VLC

So how to find the correct URL? it probably is something like:

rtsp://admin:MyPassord@192.168.x.y:554/some/path/ ?

thanks,

Ron

cjvijf
Posts: 8
Joined: Sun Feb 24, 2019 4:20 pm

Re: tonton 1px2-1329w

Post by cjvijf » Mon Feb 25, 2019 2:30 am

I can get a snapshot out, but no rstp

the snapshot URL looks like; http://192.168.x.y/webcapture.jpg?comma ... d=password

Ron

cjvijf
Posts: 8
Joined: Sun Feb 24, 2019 4:20 pm

Re: tonton 1px2-1329w

Post by cjvijf » Mon Feb 25, 2019 4:23 am

figured out one channel:

rtsp://192.168.y.x:554/user=admin&password=<passwor>&channel=1_stream=0.sdp?realstream

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests