Loopcomm IP Camera has no query string for host path

Post here to ask any questions about hardware suitability, configuration in ZoneMinder, or experiences. If you just want to know if something works with ZoneMinder or not, please check the Hardware Compatibility sections in the forum, and the Wiki first. Also search this topic as well.
Post Reply
rasiazon2000
Posts: 1
Joined: Tue Jun 11, 2013 4:16 am

Loopcomm IP Camera has no query string for host path

Post by rasiazon2000 »

I recently bought a Taiwan-made LP-C9700 IP Camera. I was able to successfully set it up and it works well on its own. However I could not make it work with Zoneminder as it only displays a blackscreen. The problem I believe has something to do with incorrect host path because I could not determine the correct host path from the camera's URL because the URL only displays the IP address and port number without a query string (that part with the question mark). Please help me. Thanks a lot.
bb99
Posts: 943
Joined: Wed Apr 02, 2008 12:04 am

Re: Loopcomm IP Camera has no query string for host path

Post by bb99 »

In firefox bring up the camera, select tools, then page info.
Post Reply