decision guide for IP66 IP VIVOTEK IP7330

Post here to ask any questions about hardware suitability, configuration in ZoneMinder, or experiences. If you just want to know if something works with ZoneMinder or not, please check the Hardware Compatibility sections in the forum, and the Wiki first. Also search this topic as well.
Post Reply
Schuhkasten
Posts: 48
Joined: Thu Jun 03, 2010 6:43 am

decision guide for IP66 IP VIVOTEK IP7330

Post by Schuhkasten » Thu Jun 03, 2010 6:51 am

Hy

I'm searching for a IP-Cam for outdoor (mount on wall) that is compatible to zoneminder and also payable.

I found the PC140 from Sony @ camsecure, is this one compatible or do you have any suggestion in the price range till 150EUR.

My lady preferes the DOME cams but I cannot find any with IP66, zoneminder compatible & payable beside the SK-720C-IP... but it`s 200 EUR...

requierement:

- picture of course not to bad
- low power consumption or sleep mode if no motion
- IP-RJ45
- outdoor
- view range is just 2-10m
Last edited by Schuhkasten on Thu Jun 03, 2010 9:20 am, edited 1 time in total.

Schuhkasten
Posts: 48
Joined: Thu Jun 03, 2010 6:43 am

Post by Schuhkasten » Thu Jun 03, 2010 9:17 am

does anyone have experience with an

Vivotek IP7330 ?

limitlessent
Posts: 46
Joined: Wed Mar 18, 2009 8:38 am

Post by limitlessent » Thu Aug 05, 2010 7:47 am

They work fine with ZM... I can't make them work in http mode but in RTP/Unicast it works fine... I can get 30fps w/o a problem @ 640x480.

Limpalot
Posts: 2
Joined: Mon Aug 30, 2010 10:59 pm

IP7330

Post by Limpalot » Mon Sep 20, 2010 7:33 am

I could really use a guide for setting up IP7330 with Zoneminder, I'm new to Zoneminder so if you could include settings at both ends that would be great!

Thank you :)

henk
Posts: 2
Joined: Sat Jan 22, 2011 5:26 am
Location: Canada

Vivotek IP7330

Post by henk » Sat Jan 22, 2011 5:31 am

You probably figured this out by now, but for others:

My Vivotek ip7330 is working fine with zoneminder. Its a nice little camera, although don't expect much for night vision sensitivity/noise.

The zoneminder setup is:

General:
Source Type: Remote
Source:
Remote Protocol: RTSP
Remote Method: RTP/RTSP
Remote Host Name: your.ip.addr.es
Remote Host Port: 554
Remote Host Path: /live.sdp
Capture Width (pixels): 640
Capture Height (pixels): 480


On the camera side it all camera defaults:
Authentication: disable (its on my LAN)
Access name for stream 1: live.sdp
RTSP port: 554
etc


I'm just running at 2fps, as this is enough for normal motion detection. No need to see someone winking at the camera :)

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests