airlive ip cameras

Post here to ask any questions about hardware suitability, configuration in ZoneMinder, or experiences. If you just want to know if something works with ZoneMinder or not, please check the Hardware Compatibility sections in the forum, and the Wiki first. Also search this topic as well.
Post Reply
jorgus
Posts: 13
Joined: Mon Apr 06, 2009 5:56 pm
Location: Bella Vista - Itapua - PY

airlive ip cameras

Post by jorgus »

Hi

I read your post about airlive od-600hd http://www.zoneminder.com/forums/viewto ... a81d2a8c57, I have configure same as the readme.txt from bc-ipptz.zip but dont work, in options, Images tap, the STREAM_METHOD must be mpeg or jpeg? I have also cctv cameras and dont work when STREAM_METHOD is mpeg.
With the airlive ip cameras type POE-100cam vs2 and WL-1000cam, which is the correct configuration for
Add Airlive camera as a monitor in Zoneminder:

Source Type: Remote

Remote Protocol: HTTP

Remote Method: Simple

Remote Host Name: admin:airlive@192.168.1.101 (substitute for own login:password@ip)

Remote Host Port: 80

Remote Host Path:/mjpg/video.mjpg?resolution=vga

Specially for Remote Host Path

sorry for my poor poor english
jorgus
Posts: 13
Joined: Mon Apr 06, 2009 5:56 pm
Location: Bella Vista - Itapua - PY

Post by jorgus »

Hi

I tried many paths I tried to figure it out with WireShark and found "jpg/image.jpg"

I tried of the following form

With WL-1000cam work good this config.

Code: Select all

     Remote Protocol: HTTP
     Remote Method: Simple
     Remote Host Name: admin:airlive@192.168.1.250
     Remote Host Port: 80
     Remote Host Path: /jpg/image.jpg
but only with this resolution 320x240.
but with POE-100CAMv2 and POE-200CAMv2 don't work the same configuration, I try with the browser access to http://IP100cam/jpg/image.jpg and http://IP200cam/jpg/image.jpg but in Remote Host Path in the zoneminder configuration dont work.


have you any idea what is wronk?

thanks
User avatar
kingofkya
Posts: 1110
Joined: Mon Mar 26, 2007 6:07 am
Location: Las Vegas, Nevada

Post by kingofkya »

Did you set shared mem.
Also find and show us some of zm's logs.
Try:
/var/log
/tmp
jorgus
Posts: 13
Joined: Mon Apr 06, 2009 5:56 pm
Location: Bella Vista - Itapua - PY

Post by jorgus »

I was looking in /var/log/zoneminder/zmwatch.log and found this:

Code: Select all

09/04/10 08:31:35.354487 zmwatch[12980].ERR [Can't get shared memory id '7a6d0008', 8: No existe el fichero o el directorio]
09/04/10 08:31:35.355160 zmwatch[12980].ERR [Can't get shared memory id '7a6d0007', 7: No existe el fichero o el directorio]
09/04/10 08:31:35.355460 zmwatch[12980].ERR [Can't get shared memory id '7a6d0009', 9: No existe el fichero o el directorio]
09/04/10 08:31:45.357621 zmwatch[12980].ERR [Can't get shared memory id '7a6d0008', 8: No existe el fichero o el directorio]
09/04/10 08:31:45.358225 zmwatch[12980].ERR [Can't get shared memory id '7a6d0007', 7: No existe el fichero o el directorio]
09/04/10 08:31:45.358493 zmwatch[12980].ERR [Can't get shared memory id '7a6d0009', 9: No existe el fichero o el directorio]
09/04/10 08:31:55.360602 zmwatch[12980].ERR [Can't get shared memory id '7a6d0008', 8: No existe el fichero o el directorio]
09/04/10 08:31:55.361159 zmwatch[12980].ERR [Can't get shared memory id '7a6d0007', 7: No existe el fichero o el directorio]
09/04/10 08:31:55.361392 zmwatch[12980].ERR [Can't get shared memory id '7a6d0009', 9: No existe el fichero o el directorio]
09/04/10 08:32:05.363514 zmwatch[12980].ERR [Can't get shared memory id '7a6d0008', 8: No existe el fichero o el directorio]
09/04/10 08:32:05.364079 zmwatch[12980].ERR [Can't get shared memory id '7a6d0007', 7: No existe el fichero o el directorio]
09/04/10 08:32:05.364315 zmwatch[12980].ERR [Can't get shared memory id '7a6d0009', 9: No existe el fichero o el directorio]
09/04/10 08:32:15.366471 zmwatch[12980].ERR [Can't get shared memory id '7a6d0008', 8: No existe el fichero o el directorio]
09/04/10 08:32:15.367121 zmwatch[12980].ERR [Can't get shared memory id '7a6d0007', 7: No existe el fichero o el directorio]
09/04/10 08:32:15.367579 zmwatch[12980].ERR [Can't get shared memory id '7a6d0009', 9: No existe el fichero o el directorio]
09/04/10 08:32:25.369867 zmwatch[12980].ERR [Can't get shared memory id '7a6d0008', 8: No existe el fichero o el directorio]
09/04/10 08:32:25.370425 zmwatch[12980].ERR [Can't get shared memory id '7a6d0007', 7: No existe el fichero o el directorio]
09/04/10 08:32:25.370669 zmwatch[12980].ERR [Can't get shared memory id '7a6d0009', 9: No existe el fichero o el directorio]
09/04/10 08:32:35.372746 zmwatch[12980].ERR [Can't get shared memory id '7a6d0008', 8: No existe el fichero o el directorio]

and in /var/log/zoneminder/zmdc.log

Code: Select all

09/04/10 08:32:35.089900 zmdc[12907].INF [Starting pending process, zmc -m 7]
09/04/10 08:32:35.091038 zmdc[12907].INF ['zmc -m 7' starting at 10/04/09 08:32:35, pid = 13665]
09/04/10 08:32:35.357538 zmdc[12907].ERR ['zmc -m 7' exited abnormally, exit status 255]
09/04/10 08:41:17.066021 zmdc[12907].INF [Starting pending process, zmc -m 8]
09/04/10 08:41:17.067186 zmdc[12907].INF ['zmc -m 8' starting at 10/04/09 08:41:17, pid = 13737]
09/04/10 08:41:17.208792 zmdc[12907].ERR ['zmc -m 8' exited abnormally, exit status 255]
09/04/10 08:41:18.010816 zmdc[12907].INF [Starting pending process, zmc -m 9]
09/04/10 08:41:18.012122 zmdc[12907].INF ['zmc -m 9' starting at 10/04/09 08:41:18, pid = 13739]
09/04/10 08:41:18.214296 zmdc[12907].ERR ['zmc -m 9' exited abnormally, exit status 255]


what it means?
User avatar
kingofkya
Posts: 1110
Joined: Mon Mar 26, 2007 6:07 am
Location: Las Vegas, Nevada

Post by kingofkya »

IT means you need to set shared memory its in the Documentation and the forum. (Most common problem)
jorgus
Posts: 13
Joined: Mon Apr 06, 2009 5:56 pm
Location: Bella Vista - Itapua - PY

Post by jorgus »

I add to

Code: Select all

[root@camaras ~]# vim /etc/sysctl.conf

kernel.shmall = 256000000
kernel.shmmax = 256000000
But still it generates the same error log


Code: Select all

[root@camaras ~]# vim /var/log/zoneminder/zmwatch.log
10/04/10 18:04:37.413684 zmwatch[3839].ERR [Can't get shared memory id '7a6d0007', 7: No existe el fichero o el directorio]
10/04/10 18:04:37.413985 zmwatch[3839].ERR [Can't get shared memory id '7a6d0009', 9: No existe el fichero o el directorio]
10/04/10 18:04:47.416150 zmwatch[3839].ERR [Can't get shared memory id '7a6d0008', 8: No existe el fichero o el directorio]
10/04/10 18:04:47.416724 zmwatch[3839].ERR [Can't get shared memory id '7a6d0007', 7: No existe el fichero o el directorio]
10/04/10 18:04:47.416963 zmwatch[3839].ERR [Can't get shared memory id '7a6d0009', 9: No existe el fichero o el directorio]
10/04/10 18:04:57.419092 zmwatch[3839].ERR [Can't get shared memory id '7a6d0008', 8: No existe el fichero o el directorio]
10/04/10 18:04:57.419661 zmwatch[3839].ERR [Can't get shared memory id '7a6d0007', 7: No existe el fichero o el directorio]
10/04/10 18:04:57.419900 zmwatch[3839].ERR [Can't get shared memory id '7a6d0009', 9: No existe el fichero o el directorio]
10/04/10 18:05:07.422037 zmwatch[3839].ERR [Can't get shared memory id '7a6d0008', 8: No existe el fichero o el directorio]
10/04/10 18:05:07.422606 zmwatch[3839].ERR [Can't get shared memory id '7a6d0007', 7: No existe el fichero o el directorio]
10/04/10 18:05:07.422845 zmwatch[3839].ERR [Can't get shared memory id '7a6d0009', 9: No existe el fichero o el directorio]

Code: Select all

[root@camaras ~]# vim /var/log/zoneminder/zmdc.log
10/04/10 17:45:30.047401 zmdc[3763].INF ['zmc -m 8' starting at 10/04/10 17:45:30, pid = 3853]
10/04/10 17:45:30.156852 zmdc[3763].ERR ['zmc -m 8' exited abnormally, exit status 255]
10/04/10 17:45:31.059151 zmdc[3763].INF [Starting pending process, zmc -m 9]
10/04/10 17:45:31.060310 zmdc[3763].INF ['zmc -m 9' starting at 10/04/10 17:45:31, pid = 3855]
10/04/10 17:45:31.060826 zmdc[3763].INF [Starting pending process, zmc -m 7]
10/04/10 17:45:31.061716 zmdc[3763].INF ['zmc -m 7' starting at 10/04/10 17:45:31, pid = 3856]
10/04/10 17:45:31.263469 zmdc[3763].ERR ['zmc -m 9' exited abnormally, exit status 255]
10/04/10 17:45:31.347464 zmdc[3763].ERR ['zmc -m 7' exited abnormally, exit status 255]
10/04/10 17:45:50.089437 zmdc[3763].INF [Starting pending process, zmc -m 8]
10/04/10 17:45:50.090555 zmdc[3763].INF ['zmc -m 8' starting at 10/04/10 17:45:50, pid = 3860]
10/04/10 17:45:50.406654 zmdc[3763].ERR ['zmc -m 8' exited abnormally, exit status 255]
10/04/10 17:45:51.008342 zmdc[3763].INF [Starting pending process, zmc -m 9]
10/04/10 17:45:51.009440 zmdc[3763].INF ['zmc -m 9' starting at 10/04/10 17:45:51, pid = 3862]
10/04/10 17:45:51.009938 zmdc[3763].INF [Starting pending process, zmc -m 7]
10/04/10 17:45:51.010784 zmdc[3763].INF ['zmc -m 7' starting at 10/04/10 17:45:51, pid = 3863]
10/04/10 17:45:51.202705 zmdc[3763].ERR ['zmc -m 9' exited abnormally, exit status 255]
10/04/10 17:45:51.220074 zmdc[3763].ERR ['zmc -m 7' exited abnormally, exit status 255]
10/04/10 17:46:30.004330 zmdc[3763].INF [Starting pending process, zmc -m 8]
10/04/10 17:46:30.005538 zmdc[3763].INF ['zmc -m 8' starting at 10/04/10 17:46:30, pid = 3866]
10/04/10 17:46:30.098361 zmdc[3763].ERR ['zmc -m 8' exited abnormally, exit status 255]
10/04/10 17:46:31.000512 zmdc[3763].INF [Starting pending process, zmc -m 9]
10/04/10 17:46:31.001642 zmdc[3763].INF ['zmc -m 9' starting at 10/04/10 17:46:31, pid = 3868]
10/04/10 17:46:31.002141 zmdc[3763].INF [Starting pending process, zmc -m 7]
10/04/10 17:46:31.002990 zmdc[3763].INF ['zmc -m 7' starting at 10/04/10 17:46:31, pid = 3869]
10/04/10 17:46:31.245401 zmdc[3763].ERR ['zmc -m 9' exited abnormally, exit status 255]
10/04/10 17:46:31.261088 zmdc[3763].ERR ['zmc -m 7' exited abnormally, exit status 255]
10/04/10 17:47:50.060541 zmdc[3763].INF [Starting pending process, zmc -m 8]
10/04/10 17:47:50.061651 zmdc[3763].INF ['zmc -m 8' starting at 10/04/10 17:47:50, pid = 3880]
Any idea??
whatboy
Posts: 304
Joined: Mon Aug 31, 2009 10:31 pm

Post by whatboy »

Did you execute as root...

sysctl -p
ipcs -l

and restarted Zoneminder???
jorgus
Posts: 13
Joined: Mon Apr 06, 2009 5:56 pm
Location: Bella Vista - Itapua - PY

Post by jorgus »

Yes, I have restarted zoneminder, but dont work. I have 2GB ram.

Code: Select all

[root@camaras ~]# sysctl -p
net.ipv4.ip_forward = 0
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.default.accept_source_route = 0
kernel.sysrq = 0
kernel.core_uses_pid = 1
error: "net.bridge.bridge-nf-call-ip6tables" is an unknown key
error: "net.bridge.bridge-nf-call-iptables" is an unknown key
error: "net.bridge.bridge-nf-call-arptables" is an unknown key
kernel.shmmax = 256000000
kernel.shmall = 256000000

Code: Select all

[root@camaras ~]# ipcs -l

---- Límites memoria compartida ----
max number of segments = 4096
max seg size (kbytes) = 250000
max total shared memory (kbytes) = 1024000000
tamaño mín. segmento (bytes) = 1

------ Límites semáforo --------
número máximo de matrices = 128
máx. semáforos por matriz = 250
máx. semáforos sistema = 32000
máx. oper. por llamada semop = 32
valor máx. semáforo = 32767

------ Mensajes: límites -------
máx. colas sistema = 3995
tamaño máx. mensaje (bytes) = 8192
tamaño máx. predeterminado cola (bytes) = 16384

Code: Select all

[root@camaras ~]# vim /var/log/zoneminder/zmwatch.log
11/04/10 17:35:30.295239 zmwatch[3584].ERR [Can't get shared memory id '7a6d0005', 5: No existe el fichero o el directorio]
11/04/10 17:35:30.295557 zmwatch[3584].ERR [Can't get shared memory id '7a6d0006', 6: No existe el fichero o el directorio]
11/04/10 17:35:30.296103 zmwatch[3584].ERR [Can't get shared memory id '7a6d0008', 8: No existe el fichero o el directorio]
11/04/10 17:35:40.298259 zmwatch[3584].ERR [Can't get shared memory id '7a6d0006', 6: No existe el fichero o el directorio]
11/04/10 17:35:40.298774 zmwatch[3584].ERR [Can't get shared memory id '7a6d0008', 8: No existe el fichero o el directorio]
11/04/10 17:35:50.301009 zmwatch[3584].ERR [Can't get shared memory id '7a6d0006', 6: No existe el fichero o el directorio]
11/04/10 17:35:50.301532 zmwatch[3584].ERR [Can't get shared memory id '7a6d0008', 8: No existe el fichero o el directorio]
11/04/10 17:36:00.303856 zmwatch[3584].ERR [Can't get shared memory id '7a6d0008', 8: No existe el fichero o el directorio]

Code: Select all

[root@camaras ~]# vim /var/log/zoneminder/zmdc.log
11/04/10 17:35:34.339214 zmdc[3515].ERR ['zmc -m 5' exited abnormally, exit status 255]
11/04/10 17:36:14.021201 zmdc[3515].INF [Starting pending process, zmc -m 5]
11/04/10 17:36:14.022555 zmdc[3515].INF ['zmc -m 5' starting at 10/04/11 17:36:14, pid = 3644]
11/04/10 17:36:14.023086 zmdc[3515].INF [Starting pending process, zmc -m 6]
11/04/10 17:36:14.024201 zmdc[3515].INF ['zmc -m 6' starting at 10/04/11 17:36:14, pid = 3645]
11/04/10 17:36:14.025045 zmdc[3515].INF [Starting pending process, zmc -m 8]
11/04/10 17:36:14.026519 zmdc[3515].INF ['zmc -m 8' starting at 10/04/11 17:36:14, pid = 3646]
11/04/10 17:36:14.182969 zmdc[3515].ERR ['zmc -m 8' exited abnormally, exit status 255]
11/04/10 17:36:14.256914 zmdc[3515].ERR ['zmc -m 6' exited abnormally, exit status 255]
11/04/10 17:36:14.279704 zmdc[3515].ERR ['zmc -m 5' exited abnormally, exit status 255]
11/04/10 17:37:34.042958 zmdc[3515].INF [Starting pending process, zmc -m 5]
11/04/10 17:37:34.044355 zmdc[3515].INF ['zmc -m 5' starting at 10/04/11 17:37:34, pid = 3650]
11/04/10 17:37:34.045026 zmdc[3515].INF [Starting pending process, zmc -m 6]
11/04/10 17:37:34.046576 zmdc[3515].INF ['zmc -m 6' starting at 10/04/11 17:37:34, pid = 3651]
11/04/10 17:37:34.047165 zmdc[3515].INF [Starting pending process, zmc -m 8]
11/04/10 17:37:34.048411 zmdc[3515].INF ['zmc -m 8' starting at 10/04/11 17:37:34, pid = 3652]
11/04/10 17:37:34.162934 zmdc[3515].ERR ['zmc -m 8' exited abnormally, exit status 255]
11/04/10 17:37:34.261450 zmdc[3515].ERR ['zmc -m 5' exited abnormally, exit status 255]
11/04/10 17:37:34.273861 zmdc[3515].ERR ['zmc -m 6' exited abnormally, exit status 255]
Jorge
User avatar
kingofkya
Posts: 1110
Joined: Mon Mar 26, 2007 6:07 am
Location: Las Vegas, Nevada

Post by kingofkya »

put
admin:airlive@192.168.1.101/mjpg/video.mjpg?resolution=vga

in firefox address bar does it work? Can you see image?


Also you english is fine.
jorgus
Posts: 13
Joined: Mon Apr 06, 2009 5:56 pm
Location: Bella Vista - Itapua - PY

Post by jorgus »

I have 4 types of IP cameras:

POE-100CAMv2 http://www.airlive.com/product /product_3.jsp?pdid=PD1244146254786 Camera ID 5
This one does not work in firefox http://192.168.1.230/mjpg/video.mjpg?resolution=vga show this error: "The requested URL /mjpg/video.mjpg was not found on this server".
But it works with http://192.168.1.230/jpg/image.jpg for a still image. In zoneminder dont work, then I set the resolution in the camera in 352x240 in firefox http://192.168.1.230/cgi-bin/admin/para ... on=352x240 and this work in zoneminder, But dont work perfectly, and it continues generating log error. If I increase the resolution of the camera the same error appears and dont have image.

Code: Select all

[root@camaras ~]# vim /var/log/zoneminder/zmwatch.log
12/04/10 08:09:17.389827 zmwatch[3646].ERR [Can't get shared memory id '7a6d0005', 5: No existe el fichero o el directorio]
12/04/10 08:09:17.390118 zmwatch[3646].ERR [Can't get shared memory id '7a6d0006', 6: No existe el fichero o el directorio]
12/04/10 08:09:17.390543 zmwatch[3646].ERR [Can't get shared memory id '7a6d0008', 8: No existe el fichero o el directorio]

POE-200CAMv2 http://www.airlive.com/product/product_ ... 4408465073 Camera ID 6
Same as POE-100CAMv2


WL-1000CAM http://www.airlive.com/product/product_ ... 7461639522 Camera ID 7
Same as POE-100CAMv2, but work perfectly.

OD-600HD http://www.airlive.com/product/product_ ... 4263676386
In firefox work "http://192.168.1.232/mjpg/video.mjpg?resolution=vga". In zoneminder It does not work with any tried configuration.

I thing the problem is only with the shared memory, how a increase the shared memory to 1gb ram?

thanks
curtishall
Posts: 440
Joined: Sat Sep 25, 2004 12:45 am
Location: Fulton, MO

Post by curtishall »

jorgus wrote:
I thing the problem is only with the shared memory, how a increase the shared memory to 1gb ram?

thanks
There's only about one thousand posts about this. Why don't you read the WIKi / FAQ? This is the number one Zoneminder issue.
--
Curtis Hall
Bluecherry
www.bluecherrydvr.com
store.bluecherry.net
jorgus
Posts: 13
Joined: Mon Apr 06, 2009 5:56 pm
Location: Bella Vista - Itapua - PY

Post by jorgus »

yes, I find:
1024mb x 1024kb x 1024byte = 1073741824 bytes

Code: Select all

vim /etc/sysctl.conf
	kernel.shmall = 1073741824
	kernel.shmmax = 1073741824
thanks
Post Reply