Problems with grandtec grand ip camera plus[resolved]

Post here to ask any questions about hardware suitability, configuration in ZoneMinder, or experiences. If you just want to know if something works with ZoneMinder or not, please check the Hardware Compatibility sections in the forum, and the Wiki first. Also search this topic as well.
Post Reply
hmcinfo
Posts: 3
Joined: Thu May 29, 2008 3:25 pm

Problems with grandtec grand ip camera plus[resolved]

Post by hmcinfo » Thu May 29, 2008 3:39 pm

Hi,

i try to install the GRANDTEC ip camera plus on Zoneminder but no video appears.

Remote Host Name IPcam-01
Remote Host Port 80
Remote Host Path http://user:pass@ip/video.cgi

(Also,i have tried with http://user:pass@ip/still.jpg)


-firefox
http://user:pass@ip/video.cgi ok

in VLC with the same URL ok

with wget http://user:pass@ip/still.jpg ok i capture one view

with wget http://user:pass@ip/video.cgi
--myboundary^M
Content-Type: image/jpeg^M
Content-Length: 019648^M
Content-Auth: 0F483F0B32ADD09^M
...

in zmdc.log
05/29/08 17:31:24.907261 zmdc[5171].INF ['zmc -m 10' starting at 08/05/29 17:31:24, pid = 8356]
05/29/08 17:31:24.957913 zmdc[5171].ERR ['zmc -m 10' exited abnormally, exit status 255]


Please, help me!
Thanks.
Last edited by hmcinfo on Mon Jun 02, 2008 8:36 am, edited 1 time in total.

User avatar
cordel
Posts: 5210
Joined: Fri Mar 05, 2004 4:47 pm
Location: /USA/Washington/Seattle
Contact:

Re: Problems with grandtec grand ip camera plus

Post by cordel » Thu May 29, 2008 9:38 pm

hmcinfo wrote: Remote Host Name IPcam-01
Remote Host Port 80
Remote Host Path http://user:pass@ip/video.cgi
Should be :

Remote Host Name user:pass@ip
Remote Host Port 80
Remote Host Path video.cgi

And the camera name is defined under the first tab.

hmcinfo
Posts: 3
Joined: Thu May 29, 2008 3:25 pm

Post by hmcinfo » Fri May 30, 2008 11:49 am

thanks for your proposition but it is not good

Already the same problem

User avatar
cordel
Posts: 5210
Joined: Fri Mar 05, 2004 4:47 pm
Location: /USA/Washington/Seattle
Contact:

Post by cordel » Fri May 30, 2008 5:19 pm

Okay, so raise your debug level and see what the logs say.

hmcinfo
Posts: 3
Joined: Thu May 29, 2008 3:25 pm

Post by hmcinfo » Mon Jun 02, 2008 8:35 am

thanks a lot

it works!

the good configuration is:

Remote Host Name user:pass@ip
Remote Host Port 80
Remote Host Path /video.cgi "don't forget /"

ynn
Posts: 149
Joined: Fri Mar 17, 2006 2:30 am

Post by ynn » Fri Aug 01, 2008 3:19 pm

what do you think of the camera so far, is it good camera?do you have problem with the camera? because i am planing to buy this camera and put it outdoor with my own housing, so i need to know if this camera durable enough with constant heat
thanks.

Post Reply

Who is online

Users browsing this forum: No registered users and 13 guests